Difficulties can anneal will.

困难可以磨练人的意志。

What do you mean by anneal?

淬火钢为什么要退火呢?。

They are hardening, temper and anneal.

它们是淬火、回火和退火。

Three:they are hardening, temper and anneal.

三个过程：它们是淬火、回火和退火。

Three. They are hardening, temper and anneal.

三种。它们是淬火、回火和退火。

Three . They are hardening, temper and anneal .

三种。 它们是淬火、回火和退火。

But I will cherish this chance to anneal myself.

不过，我会珍惜这次磨练自己毅力的机会。

Anneal means make harden steel soft and remove brittleness.

退火就是使淬火钢变软并消除其脆性。

The puller also applied growing and vacuum anneal of laser crystal.

该设备也适用于多种激光晶体的生长和激光晶体的真空退火。

Offer the bottle galss production line design, contain the raw material, anneal.

供应瓶罐玻璃生产线设计，包括原料，退火等。

The main rason of leading to overhigh hydrogen content was insufficient anneal after forged.

导致氢含量过高的原因可能在于锻后退火不足。

Reducing annealing furnace: The furnace is used to anneal and reduce cold rolled carbon steels.

还原退火炉：炉子用于冷轧低碳钢的还原退火。

It is said that no one is perfect, Anneal is said to be perfect again, Do you have for next term?

据说人无完人。又据说磨练出完美。你们对下词好吗？

Long working life and small deforming can be realized by improving anneal process and quenching process.

通过改进退火工艺和淬火工艺，获得更高使用寿命和更小的变形。

The resistivity and flexivity of the resistance thermostat metal change while the anneal process change.

当退火工艺变化时，电阻系列热双金属的电阻率和温曲率等主要性能将产生变化。

Cold coiler is used cold roll strap steel unit and acid washing, anneal, cutting, coating of strap steel.

张力卷取机一般用于冷轧带钢机组和带钢的酸洗、退火、剪切、涂层等精整机组。

This paper introduces an example of PLC in fuzzy control Temperature control of steel plate anneal furnace.

本文介绍了P LC在模糊控制中的一个实例，即钢板退火炉的炉温控制。

The uniform ultra-fine grained copper was prepared by asymmetrical accumulative rolling bonding(AARB)and anneal.

对铜材进行异步累积叠轧并退火处理，制备出了均匀稳定的超细晶铜材。

High anneal temperature and long anneal time do good on increasing the size and density of silicon nano-crystals.

退火后薄膜中的晶粒尺寸和密度都有所提高，退火温度升高或退火时间延长都有助于结晶状态的改善。

The quality of top silicon layer formed by anneal at low temperature may be better than that at high temperature.

通过低温退火，可以获得质量优于高温退火的顶部硅层。

The procedure using anneal instead of normalizing will improve the productive efficiency of electroslag welding joint.

用退火代替正火后的电渣焊工艺可大大提高生产效率。

The harmness of the hydrogen frangibility is discussed, and then the appropriate conditions of vacuum anneal are gained.

对氢脆的危害进行了探讨，得出了适宜的真空退火条件。

To compare the results of simulated anneal algorithm on the static RWA problem, a heuristic algorithm is introduced as reference.

为了衡量模拟退火算法解决静态rwa问题的结果，采用了一种启发性算法作为参考。

The mathematic model of this process is built based on a covered anneal gas boiler, and a disturbance compensation method is provided.

并以煤气罩式退火炉为例，建立了该过程的数学模型，提出了有煤气压力干扰补偿方案。

The results showed that high dielectric constant and low loss BST film can be fabricated using this method without special anneal process.

使用这种方法不需要专门的退火工艺，就可以制备晶体结构完整的高介电常数BST薄膜。

Combined on the characteristics of fuzzy and PID control, it adopts a fuzzy-PID control system to control the temperature of anneal stove.

本文结合模糊控制与PID控制的优点，采用模糊pid控制器控制退火炉的温度。