Smartphones reduce the possibility for new and insightful minds, and steal away our dead time.

智能手机减少了出现新颖且精辟的想法的可能性，还偷走了我们的寂静时间。

Learn during "dead time". Listen in your car, on the train, or while jogging.

把那些“死时间”也都利用起来：开车、坐火车、或者慢跑时都可以听课。

Integrator and dead time process is a special case of unstable systems.

包含非自衡对象的过程，是不稳定过程中的一种特殊情况。

Don't sigh for the dead time, must face to in a hurry the time slip away.

不要为已消逝之年华叹息，须正视欲匆匆溜走的时光。

This causes well known dead time effect which distorts the output voltage and current.

这将导致电压和电流的畸变，也就是所谓的死区效应。

The errors resulted from the correction to "false count" and "dead time" were estimated.

估计了由于“假计数”、“死时间”漏计数校正引入的误差。

A modified dead time compensation method was used to obtain better output voltage waveforms.

采用了改进的死区效应补偿方法以获得理想的输出波形。

In many cases, Allan variance has to be measured with dead time and then modified with Barnes bias function.

在很多场合只好用有间隙采样做阿仑方差，然后用巴勒斯偏函数加以修正，其繁杂程度是可想而知的。

But in practical measurement, it is very difficult to make no dead time sample due to the counter's dead time.

但实际测量时由于计数器的死区时间，使得无间隙采样十分困难。

Unreasonable selection of dead time can make inverting components to produce higher inrush voltage and current and even damaged.

死区时间选择的不合理会使逆变器件产生过高的浪涌电压和电流甚至损坏。

Because dead time is compensated at the same time, the output waveform is improved, and output torque is strengthened in low frequency.

进行了死区补偿，使逆变器在低频输出时波形明显改善，提高了系统在低频时的转矩输出。

The principle of this method is introduced in detail, and a kind of circuit of generating dead time and its timing simulation are given.

详细叙述了该方法的基本原理，并以其中的一个死区时间产生电路为例，介绍了电路的设计要点及时序分析。

Podcasting allows people to make far more effective use of their travel - what might have been dead time becomes valuable reflective time.

播客允许人们可以更有效的利用他们旅途的时间，那些曾经是没用的时间如今变成了有效的反思时间。

Different closed loop poles are selected according to the damping ratio and dead time, and simple formulas are provided for the calculation.

按照阻尼比和模型的延迟时间选择不同的闭环极点，并且为计算提供了简单的公式。

Aimed at the influence on the inverter output voltage caused by the PWM inverter dead-time, one dead time compensation strategy is proposed.

针对PW M电压型变频器死区时间对输出电压的影响，提出了一种死区时间补偿方案。

The results indicate that the dead time effect distorts inverter output voltage and current waveform and increases torque ripples of the motor.

结果表明，死区效应引起了逆变器输出电压波形畸变，引起了电机电流波形畸变和转矩脉动。

For the situation with dead time and constraints, a control strategy of increment model algorithm was developed using goal programming as optimal strategy.

针对纯时延和有约束的情况，应用目标规划作为优化策略，提出了一种增量型模型算法控制策略。

This paper analyzed the influence of the dead-time effect acting on the output voltage of SVPWM inverter, and proposed a solution to dead time compensation.

本文在分析死区效应对空间电压矢量调制输出电压影响的基础上，给出了一种对死区效应进行补偿的方案。

The schottky diode bypasses the gate resistor in the gate discharge path, so that there is no falling edge delay. The delay at the rising edge adds dead time.

为了增加更多的死区时间，补偿功率管的切换瞬间短暂延时，增加了一个肖特基二极管，与栅极电阻。

The dead time control in SPWM converter increases the harmonic component in voltage output and decreases the voltage utilization and reliability of converters.

SPWM变换器中的死区设置使变换器输出电压谐波含量增加、电压利用率和可靠性降低。

A kind of object reference parameter adaptive dead time compensator is presented. A group of models are Used to simulate the uncertain process with large dead time.

本文提出了参考对象的参数自适应时滞补偿器，该补偿器用一族模型拟合大时滞不确定过程。

By analyzing the basic influence of the "dead time effect" acting on the output voltage of SVPWM inverter, the concept of the dead time voltage vector is put forward.

在分析死区效应对空间电压矢量调制输出电压影响的基础上，提出死区电压矢量的概念，给出死区电压矢量的求取方法。

The uncertain object with dead time is taken as a reference model and a kind of adaptive rule is proposed to make parameters of the compensator to approach the object's.

以线性大时滞不确定被控对象为参考模型综合出自适应律，使预估补偿器的参数逐步逼近被控对象的参数直至相等。

To listen to doctors talk about life down time, without exception, are tightly grasped fist, dead time, but also, without exception, shrugged, doing nothing is this truth away.

听医生讲，人生下来的时候，无一例外地都紧紧地握着拳头，死的时候，也是无一例外地摊开手掌，撒手而去就是这个道理。

Owing to the difficulty of identifying dead time parameter of industrial process, a kind of new step response method is presented to identify dead time parameter of industrial process.

针对工业过程中时滞辨识较为困难这一特点，提出一种新颖阶跃响应法来辨识工业过程的时滞参数。

By the time our officers arrived, the dead and the dying were everywhere.

当我们的警官到达的时候已是遍地尸首和垂死的人。

The train was dead on time.

火车正点出发（或到达）。