The influence of sampling period to NCS is discussed.

讨论了系统采样周期对网络控制系统的影响。

And this model can be use to direct the design of NCS.

该模型也可以用于指导网络控制系统的设计。

First, the factors affecting the performance of NCS are presented.

首先，对影响NCS性能的一些因素进行了分析。

Secondly, the scheduling algorithms of the periodic task of NCS are studied.

其次，研究了网络化控制系统周期性任务的调度算法。

At present, research on NCS mainly focuses on either control or network scheduling.

目前，对于网络控制系统的研究主要从控制和网络调度两个方面展开。

Therefore, it is imperative to analyze the stability of NCS with network-induced delay.

因此很有必要对存在时延的网络化控制系统的稳定性进行分析。

Firstly, analysis and modeling for the NCS with networked, induced delay are investigated.

首先，对具有时延的网络控制系统进行时延分析和建模。

Finally, the prospect of NCS and some issues that should be solved are pointed out in this thesis.

最后，展望了网络控制系统的发展前景，指出今后有待进一步研究的理论与应用问题。

At minimum, each domain controller stores three NCs in its local copy of the Active Directory database.

每个域控制器可在Active Directory数据库的本地副本中存储至少三个NC。

Secondly, controller design of NCS for delay compensation is studied when the controller is clock-driven.

其次，研究了控制器为事件驱动时网络控制系统的时延补偿控制。

Finally, an example validates that the NCS is stable when the delay is within the maximum allowable delay.

最后通过算例验证了时延小于最大允许网络时延时，NCS是稳定的。

How to solve these problems in order to effectively play the advantage of NCS has become a research focus.

如何解决这些问题，充分发挥其优势，是国内外学者研究的重点所在。

The performance of NCS is related to not only control strategy but also the scheduling of network resource.

本文主要研究网络控制系统的调度方法，使整个NCS的性能达到优化。

Materials and Methods: The ct images of 7 cases of clinically diagnosed NCS, were retrospectively analyzed.

材料和方法：回顾性分析7例临床诊断胡桃夹征的CT资料。

This paper deals with fault tolerant control of a Networked control Systems (NCS) problem with network delay.

本文是针对一类有网络延时的网络化控制系统，研究其故障容错控制问题。

Due to quantum confinement effect, band gap of semiconductor nanocrystals (NCs) is dependent on the particle size.

由于量子限域效应，半导体纳米晶的能带宽随粒子大小而改变。

Finally, the problems to be dealt with in NCS are pointed out and the future development directions in NCS are given.

最后，论述了NCS研究中尚待解决的问题，展望了网络控制系统未来的发展前景。

In this paper, considering the random time-delay of NCS, We analyze its sequence and set up the mathematic model of NCS.

本文充分考虑了网络化控制系统的随机时延，分析了网络时延的时序，并构建了网络控制系统的数学模型。

The research contents of this thesis are about stability analysis of networked control systems (NCS) with multiple-time delay.

本论文的研究内容为网络控制中多延时系统的稳定性分析。

This paper proposes a new method to design state feedback controller for networked control system (NCS) with time-varying delays.

为带时变时延的网络化控制系统提出了一种新的状态反馈控制器的设计方法。

In this paper, a novel adaptive predicted control method was proposed to analyze NCS (networked control system) with random delays.

采用自适应预测控制的方法对带有随机时延的网络化控制系统进行分析和研究。

We consider the networked control system (NCS) from linear quadratic Gaussian (LQG) method, switched system and neural network control.

对网络控制系统分别从高斯型二次最优（LQG），切换系统和神经网络控制三个方面来考虑。

Finally, the research conclusions are presented and the remaining problems that need further research of NCS are pointed out in this thesis.

最后对本文的主要工作进行了总结，并指出了网络化控制系统中有待进一步研究的问题。

The problem of robust fault-tolerant control for networked control systems (NCS) with uncertain time-delay and uncertain parameter is studied.

研究了一类具有网络诱导时延和参数不确定性网络化控制系统鲁棒容错控制问题。

The model of NCS with multiple-packet transmission is presented considering system noise and network-induced delay longer than one sampling period.

在考虑系统噪声和网络诱导延时大于一个采样周期的情况下，给出了多包传输的网络控制系统模型。

Magnificent NCS artificial sunrise, endless golden light begin struggling to run forward in all directions outside the nano-glass window in the floor.

壮丽的新中方的人造日出，无边无尽的金色光芒，开始在落地纳米琉璃窗外向四面八方奋力奔跑向前。

After used medium in eluding 0.5% NCS and without NCS direct starvation, the Numbers of fibroblast first in creased slightly, then gradually decreased.

用不含血清和含0.5%血清的培养液直接饥饿指数生长期的成纤维细胞，细胞数量先是略有增长，然后逐渐下降。

The paper expound the structure, software and hardware equipment and the function of the network control system (NCS) for Shandong Laicheng power station.

阐述了山东莱城电厂网络计算机监控系统(ncs)的构成，软硬件配置及NCS的功能。

Networked control systems (NCS) are a kind of closed-loop control systems where the sensors, the controller and the actuators exchange data through network.

传感器、控制器与执行器的数据经网络进行传输与交换的闭环控制系统称为网络控制系统。