Armstrong: Out of Detent. Auto.

阿姆斯特朗：制动脱离，自动的。

A detent is one notch of the mouse wheel.

制动器是鼠标轮的一个凹口。

Currently, a value of 120 is the standard for one detent.

当前，120是一个制动器的标准值。

Quick Release Pin, Ball lock pin, Detent pin, Locator pin.

自主开发产品：快卸销，定位销，球锁销，快速插销，不锈钢销。

We use a soft stop detent to indicate the desired touchdown sink rate in the STOVL mode.

我们用一个软着陆闭锁装置来标明垂直起降模式下所需要的着陆下沉速率。

DETENT SOLENOID, An electrical solenoid used for controlling the engagement of the actuator output.

锁定电磁线圈， 用于控制作动器输出接通的电磁线圈。

The mechanical detent with 100 positions per revolution permits precise and exact control of movement.

带有100个定位的机械止动装置，每一循环允许对运转有准确精密的控制。

Slag collector: wet slag discharge is made by hydraulic ratchet wheel, detent, worm wheel or worm from both sides.

清灰机构：采用液压驱动棘轮、棘爪装置或蜗轮蜗杆装置湿式双侧除灰。

A slotted design is also available on request when detent torque is needed, for applications such as Damper Control.

当用到定位转矩做阻尼控制时，有槽设计也可达到低震动。

Through the design of unequal tooth pitch, the detent torque can be effectively minimized for improved operation performance.

采用不等齿距的设计，减小二相电动机的定位转矩，提高其运行性能。

Similarly, a detent pin is slidably seated in the post and is engaged by the cam for axial displacement into the lock cylinder.

同样，定位销可 滑动地固定在杆内并且被凸轮接合，以轴向移入锁芯中。

The utility model is formed by a distributor body, a rotary valve core, a locating wheel, a locating detent, an oil cylinder and so on.

它由分配器本体、旋转阀心、定位轮、定位爪、油缸等组成。

He was one of the most inventive watchmakers of his day and held patents for a detent escapement, bimetallic balance and helical balance spring.

他是那个时代最具创造力的制表大师之一，他拥有锁簧式擒纵机构、双金属摆轮以及螺旋游丝的专利。

By mechanics calculating and physicochemical analyzing, the reason is found that it results from the cohesive wear between the detent hook and forced shaft, and reappears in validate test.

简要介绍了某投放装置在做地面发射试验时发生粘着磨损的故障情况，通过受力计算和理化分析，确定了是由于锁制钩和承力轴发生粘着磨损所致，验证试验中故障复现。

To achieve this, at least one detent lock comprising a lock that engages in a positive fit and has a limited retaining force is located between a drive element of the drive and the pivot plate.

为此，在驱动装置输出 元件与回转盘之间布置至少一个卡位锁紧机构，所述卡位锁紧机构具 有配置有有限的保持力的、形状配合的锁紧装置。

Relative rotation of the two-part housing resets the lock cylinder via the reset member and detent pin, and allows the lock cylinder to be placed in a learn mode for rekeying without a valid key.

两部分壳体的相对旋转通过复位构件和定位销来复位锁芯，并且允许锁芯处于记忆模式，用以在不需要有效钥匙的情况下更换钥匙。