An old freight car and an autocycle collide.

一辆大货车和一辆摩托车碰撞。

The caboose is coupled to the last freight car.

守车和最后一节货车联接上。

Seeing an empty freight car, he crawled in for shelter and rest.

他看到一节空的货车车厢便爬进去避避风，休息一下。

The key of acceleration and adding axle load of freight car is bogie.

铁路货车提高速度和增大轴重的关键是转向架。

The freight car was tank cars and the hopper cars that piled up cokes.

货物车辆大部分是装著焦炭漏斗货车的或著油罐车。

C70 type freight car is a main kind of operational freight car in China.

C70货车是中国的主型铁路货车，其轮—轴失效关系到铁路运输安全。

A freight car with a door in the floor through which materials are unloaded.

底卸式车一种货车，底下装有可卸货的门。

The heat load borne by wheels increases after speed increase of the freight car.

货车提速后，车轮承受的热负荷相应增大。

Cross sustaining device is one of the key parts of speed increased freight car bogies.

交叉支撑装置是提速货车转向架的关键部件之一。

The present state of freight car braking equipment in our country is described generally.

概述了我国货车制动装置的现状。

The freight car impact on the marshalling yard may cause serious damage to cars and ladings.

货车调车冲击是导致车辆结构及其货物损坏的主要原因之一。

Abstract: Gas shielded flux cored wire is used in the domestic railway freight car industry.

摘要：气体保护药芯焊丝在国内铁路货车行业应用较少，目前主要采用气体保护实心焊丝。

The results of this study are very useful to guide modifying design of the Zhuan 8A freight car bogies.

本文研究所得到的结果对指导转8A转向架的改进设计起到积极作用。

In this paper, a new design of a automatic static weight freight car empty and load brake equipments described.

提出了静测重自动空重车调整装置的研究结果。

Detention of a ship, freight car, or other cargo conveyance during loading or unloading beyond the scheduled time of departure.

船或运货车厢或者其他船货超过了预定时间的滞留。

The causes to separation of freight car couplers in operation are analysed, and relevant preventative measures are put forward.

对运行中货车车钩分离的原因进行了分析，并提出了相应的防范措施。

A man who has never gone to school may steal a freight car; but if he has a university education, he may steal the whole railroad.

没上过学校的人，或许会偷一辆货卡；但如是受过大学教育的，则可能偷掉整条铁路。

In view of the problems existing in operation of the cleaners for freight car bogies, the technical improvement scheme is put forward.

针对现有货车转向架清洗机使用中存在的问题，提出了技术改进方案。

With the combination of the need of railway transport development, the development trend of freight car bogies in our country is put forward.

因此，开发研制出满足提速、重载要求的转向架是实现铁路提速和重载运输的前提。

The structural characteristics of the swing type freight car bogies are described, and the basic principles of the swing type bogies are expounded;

介绍了货车摆动式转向架的结构特点，阐述了摆动式转向架的基本原理；

The testing result shows that it has certain feasibility to inspect the troubles in railway freight car rolling bearings with the AE diagnostic method.

试验结果表明，将AE诊断法用于检测铁路货车滚动轴承故障具有一定的可行性。

In this paper, some typical structures of freight car buffers used in some countries are described, and the causes of box crack for MX-1 buffer analyzed.

本文介绍了各国所用货车缓冲器的几种典型结构，并对我国MX—1型缓冲器箱体裂纹原因进行分析。

Bottom frame brace system was imported from SCT and it intends to increase the anti-warp performance so that the freight car operating speed can be raised.

交叉支撑装置可以提高转向架的抗菱刚度，从而提高了车辆的运行速度。

Described are the structure and the function of hardware and software of the measuring and allocating system for roller bearing and journal of the freight car.

介绍了铁路货车段修专用的滚动轴承、轴颈测量与选配系统的软硬件结构与功能。

The main technical parameters, design thought, design structure and testing of the higher cross braced low power freight car bogies with 2e axles are described.

介绍了2e轴中交叉支撑低动力作用货车转向架的主要技术参数、设计思想、设计结构及试验等情况。

At the same time, due to the stable macroeconomic situation at home and abroad to promote highway freight car market recover gradually, logistics demand and growth.

同时，由于国内外宏观经济形势稳定促进公路货运市场逐渐恢复，物流车需求也呈增长态势。