Connected with it is a control rod.

跟它相连的是一个操纵杆。

To measure the calibrating curve of control rod more speedily.

可以比较快的测量控制棒的刻度曲线。

Control rod worths and other operation safety parameters of core are acceptable.

各堆芯方案的控制棒价值等运行安全有关参数都可以接受。

Electromagnetic movable coil control rod drive mechanism is a new type drive mechanism.

可移动线圈电磁驱动机构是一种新型的反应堆控制棒驱动机构。

The control rod position is one of the most important process parameters in nuclear reactors.

控制棒位置是核反应堆最重要的运行参数之一。

Design of this system is based on passive system, integrating drive and guide of control rod.

该系统是以非能动系统为基础设计的，并实现了传动、导向一体化。

This paper describes a kind of control rod position indication system with self-coding detector.

介绍了一种自编码式棒位测量系统。

Their power was also increased by introducing a control rod which moved up and down with the beam .

因为增加了一根随着吊杆上下移动的控制杆，发动机的功率也增大了。

The critical acceleration for the control rod not to move up or down abnormally was determined using them.

通过对计算结果进行分析，得出不同温度、流量下水力驱动控制棒系统不出现异常提棒现象的临界加速度。

The control rod string which is consisted of pumping rod and controller is tripped into the release string.

抽油杆与控制器组成的控制杆柱下入到丢手管柱内，控制杆柱上部与杆式泵的进油孔相连。

The key technique problems in design are discussed in accordance with the main failure patterns of control rod.

针对控制棒的主要失效模式，讨论了关键的设计技术问题。

The cruciform control rod controlling is the main method to control reactivity in the nuclear heating reactor (NHR).

核供热反应堆的过剩反应性主要靠十字形控制棒来控制。

The cross sections in the region that includes control rod and part reflector are homogenized by the weight of fluxes.

按通量权重归并控制棒区（包括控制棒、空隙及石墨反射层的整个圆环）的均匀化截面。

This work concerns in the rigidity experiment of coil-moveable electromagnetic drive mechanism for reactor control rod.

本工作在反应堆控制棒可移动线圈电磁驱动机构工程样机实验台架上，进行了电磁铁刚度实验。

The control rod drive mechanism(CRDM) is one of the key equipment related to reactor normal operation, safety and reliability.

控制棒水力驱动系统是核供热堆的关键系统之一 ，其运行失效将直接导致供热堆的非计划停堆。

The control of the pressurized-water reactor's power is transited by accommodate -ting the control rod and boron concentration.

压水堆核电站反应堆功率的控制是通过调节控制棒和硼浓度来实现的。

A hydraulic step cylinder system (HSCS) used as a new kind of nuclear control rod driving system is driven by dynamic pressure.

水力步进缸系统是以流体动压为动力的反应堆新型控制棒驱动装置。

Control rod is a key safety control system for nuclear reactors, with the scram time parameters being crucial to reactor safety.

控制棒的落棒在反应堆控制中是一个十分重要的方面，尤其是落棒时间这个参数。

The safety switch comprises a heat transfer piece, an insulating seat, a fusible body, a control rod and a movable safety piece.

该保险开关，它包括一热传递片、一绝缘座、一可熔体、一控制杆以及一动保险片。

The dynamic stepping motion of a hydraulic cylinder for the control rod hydraulic drive mechanism (CRHDM) was tested experimentally.

针对控制棒水压驱动机构单个水压缸的步进性能，通过实验获得了水压缸步进的动态过程。

If you're having trouble recognizing which instrument or control Rod refers to, hold your cursor over any item displayed on the panel.

如果您有麻烦认出哪仪器或控制标尺提到，拿着您的游标在任一个项目被显示在盘区。

The flow resistance of the integrated valve is one of the key parameters for the design of the control rod hydraulic drive system(CRHDS).

控制棒水力驱动系统是核供热堆的关键系统之一 ，其运行失效将直接导致供热堆的非计划停堆。

The hot life test has been done to testify whether the longeval Control Rod Drive Mechanism can meet the requirements of the design indexes.

为验证长寿命控制棒驱动机构能否满足设计要求，进行行驱动机构热态寿命考验。

Duty Officer: Each sling only allows 10 bags. When switching on, push the control rod slightly. If so, we are satisfied with our co-operation.

值班驾驶员：每吊只允许吊10包，打开吊车时，请轻推操纵杆，若如此，我们对彼此合作表示满意。

The result of measurement proves that the drop property parameters meet the requirements of the design specification for Control Rod Drive Line.

测量结果表明，包括落棒时间在内的各种性能参数均满足试验要求。

In this paper, the multi-region first collision probabilities are used to derive the formula for calculating blackness of a cylindrical control rod.

本文利用多区首次碰撞几率，推导计算圆柱形控制棒黑度的公式。

The control rod is inserted into the containing via hole from top to bottom, and the lower end of the control rod supports against on the fusible body.

该控制杆，它从上往下插接进该容置通孔，而且，它下端抵靠在可熔体上。

The response amplitude also relates to the impact direction. When the reactor moved down rapidly, the response displacement of the control rod is larger.

冲击响应幅值还与冲击方向有关，当冲击位移向下时，控制棒的响应位移相对比较大。

This paper simply presents the bases of design, design requirement and experimental investigation of Qinshan nuclear power plant's control rod drive li-ne.

本文简要介绍秦山核电厂控制棒驱动线的设计依据、设计要求以及试验研究。