As the glass abrasive paper is used, the effect of ageing is prominent.

在采用玻璃砂纸时，时效处理更显出其良好效果。

For safe adhesion of the rubber slightly sand the blade's rim with abrasive paper.

为橡胶的安全的粘附稍微沙片的与粗糙的论文的边界。

Repair or replace the electric brush; clean the commutator surface by abrasive paper and blow it clean.

修理或调换电刷，用木砂纸清理整流子表面，并吹净。

If required, rub with fine abrasive paper or lightly blast with suitable grit all the surface to which adhesive will be applied.

如果需要，使用细砂纸打磨或用适当的砂粒轻度喷吹所有的拟敷胶表面。

Ink rub: Smears of ink caused when the surface of an abrasive paper, often matt art, rubs against the ink film before it is completely dry.

油墨擦花：具研磨剂的纸，通常是无光粉纸，当它面上的油墨未干而与另一张纸磨擦所造成的擦拭花情况。

As the base paper of high quality abrasive paper, the latex paper must possess the properties of water-proof, solvent and high-temperature resistance.

乳胶纸作为高品质砂纸生产基纸，要求具有较强的耐水性、抗溶剂性及耐高温性。

Natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up.

砂布、砂纸及以其他材料为底的类似品，不论是否裁切、缝合或用其他方法加工成形。

The processing technologies, testing method, abrasive and accessory materials used in processing procedure of reticle are introduced in the paper.

本文主要介绍调制盘的加工工艺与测试方法以及加工过程中所用的磨料与辅料。

In this paper, the CBN grinding wheel of high efficiency, accuracy and surface quality was studied by means of low pressure abrasive water jet.

采用低压磨料水射流对高效率、高精度、高表面质量的CBN(立方氮化硼)砂轮进行了研究。

This paper provided basis for application of rotary abrasive jet in drilling radial horizontal Wells.

该试验研究为磨料旋转射流应用于径向水平钻井提供了基础。

Authors suggest the linear relationship between the anti-abrasion parameters consisting of the amount and distribution of carbides, abrasive surface hardness and the abrasion resistance in this paper.

本文还提出了由碳化物数量、分布、磨损面硬度等因素构成的抗磨参数与相对耐磨性的线性关系。

Taking the kinematic mass abrasive as research object, this paper analyzed theoretically and experimentally the influence of the planetary driver ratio in the process of centrifugal polishing.

本文以在离心场中运动的整团磨料为研究对象，从实验和理论两方面分析了离心式研磨在加工过程中行星传动比对加工质量和加工效率的影响。

Superhard - abrasive grinding wheel has decisive influences on the advance of grinding technique, this paper introduces the reasonable using method of superhard -abrasive grinding wheel.

超硬磨料砂轮对磨削加工技术的进步有决定性影响，本文介绍了超硬磨料砂轮合理使用的方法。

In this paper, some new methods of dressing ultrahard abrasive grinding wheel and ELID dressing technology were summarized.

本文简要概述了近年来超硬磨料砂轮修整的一些新方法与ELID修磨技术。

Exhibit: sand belt, sand paper and abrasive product, diamond sand wheel, Pitch cutting, Black lead cloth, etc.

展品：砂带、纸及及其异型产品，石墨布、脂、瓷砂轮、脂切割片、刚石砂轮等。

In this paper a new kind of superhard abrasive with corundum-coating was introduced.

本文介绍了一种新型的刚玉涂覆的超硬磨料。

The correct technique and variation law of precision about displacement abrasive of serrated tooth circle divider are presented in this paper.

本文探讨了多齿分度盘易位对研的正确条件和易位对研时的精度变化规律。

Cup wheel is investigated in this paper which includes cutting model of abrasive particle, computer model of face grinding and optimization of technological parameters etc.

本文包括杯形砂轮的磨粒切削模型、计算机模型，以及工艺参数的优化研究等内容。

This paper proposed the criteria to select qualified abrasives for imported granite—cutting machines on the bases of abrasive wear mechanisms and the working principle and conditions of the machines.

本文在分析进口锯石机工作原理和工况条件的基础上，根据磨料磨损机理，提出了适于进口锯石机的新型石材锯切砂的选材依据；

In this paper, frazzle theory, frazzle form and frazzle factor of the abrasive nozzle have been studied.

本文主要研究了磨料水喷嘴的磨损机理，磨损形式及影响高压磨料水喷嘴磨损的主要因素。

This paper elaborates on the Artificial Neural Network application to the abrasive water jet cutting technology.

主要叙述了人工神经网络理论在磨料水射流切割技术中的应用。

Simulating test and vibration signal analysis for abrasive wear failure of rollings bearings have been made in this paper.

对滚动轴承磨粒磨损故障进行了模拟试验和振动信号的处理和分析。

The common-rail pipe abrasive flow machining equipment is designed in this paper.

本文设计了一套针对共轨管磨粒流抛光的装备；

This paper discusses the performance and application of natural abrasive such as diamond, corundum, garnet, quartz, flint, pumice, diatomite, hematite and perlite.

本文介绍了天然金刚石、天然刚玉、石榴石、石英、燧石、浮岩、硅藻土、赤铁矿、珍珠岩等天然磨料的性能特点和其应用。

This paper introduces the electroplating process of diamond grinding tools. It also lays emphasis on the discussion of the process enbeding abrasive.

本文介绍了金刚石磨具的电镀制造工艺，对植砂过程作了重点论述。

In this paper, the research works on the wear of polymers are reviewed, mainly in the aspects of sliding wear, abrasive wear and erosive wear.

本文综述了近年来国内外学者在高分子材料磨损方面的研究工作，着重阐述了滑动磨损、磨粒磨损、冲蚀磨损的研究进展。

A new assumption of boundary conditions of abrasive flow in abrasive flow machining is presented in this paper. The new assumption is verified by a simple experiment.

提出了磨料流加工磨料流动新的边界条件假设，并用简易实验验证了这种假设。

According to the problem that the remove of fiberglass is worse than metal material, grinding head with diamond abrasive is used to process the fiberglass column in this paper.

文中主要针对玻璃钢件切削加工性较差的问题，采用带有金刚石磨粒磨头对玻璃柱件进行加工。

In the paper a new technique for cyclo-gear grinding has been presented. The technique takes abrasive belt as grinding tool.

摆线齿轮砂带磨削工艺以砂带为切削工具，采用全齿宽同时切入的线成形磨齿方案；