They put the saliva in a rheometer, a tool that can measure viscosity.

他们把唾液放在流变仪—一个工具中，这样就可以测量唾液粘度。

Rheological properties of molten chocolate are studied by using a rheometer.

对融化巧克力浆料进行了实验研究，揭示了其假塑性和触变性。

Rotated rheometer was used to determine the yield stress of lithium lubricating grease.

选用旋转流变仪测定了锂基润滑脂的屈服应力。

Calibrating the rheometer to test the influence of the pressure for rheological property.

标定加压旋转流变仪，用于测试压力对流变性的影响。

The composition of HAAKE torque rheometer and its application to polymer moulding were introduced.

介绍了HAAKE转矩流变仪的系统组成及其在高分子材料成型加工中的应用。

Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer 15.

用转矩流变仪测定热固性塑料的热流量和固化特性的试验方法15。

The UV light source can be triggered automatically by the rheometer software during the measurement.

紫外光源在测量过程可通过流变软件实现自动激活。

The firmness, elasticity and shearing force of bread by rheometer during storage of bread were determined.

采用流变仪测定了面包在贮存期间的硬度、弹性及剪切力的变化。

In addition to a comprehensive range of laboratory rheometer, contraves manufacture a series of viscometers .

康特拉维斯公司除了生产实验室流变仪的许多品种外，还生产一系列粘度计。

The processability of rare-earth magnetic materials with 7 wt% PA6 was studied by using HAAKE torque rheometer.

应用HAAKE转矩流变仪，研究了尼龙6质量分数为7%时，稀土磁性塑料的加工工艺性能。

Rheological characteristics of POM/COPA blends prepared by melting blending was studied with capillary rheometer.

通过熔融共混法制备了POM/COPA共混物，用毛细管流变仪研究了其流变特性。

Effects of surfactant on viscosity of cetyl hydroxyethylcellulose ( CHEC ) solution were investigated by rheometer.

通过流变仪研究了几种表面活性剂对十六烷基羟乙基纤维素（ CHEC ） 溶液黏度的影响。

According to the practical application object of the torque rheometer, the design of temperature control system is carried on.

本文针对转矩流变仪这个实际应用对象，进行了温度控制系统设计。

The native starch was transformed to thermoplastic starch (TPS) by the torque rheometer, single screw extruder and plasticizers.

利用转矩流变仪、单螺杆挤出机和增塑剂将天然淀粉转变为热塑性淀粉（TPS）。

The effect of cure temperature and rotor speed on rheological properties for epoxy resin matrix by torque rheometer are studied.

用转矩流变仪研究了温度、转速对环氧树脂基体固化性能的影响。

The rheology properties of polymer filled with lower melting point dual component metallic alloy were studied by Hakke rheometer.

利用哈克流变仪对低熔点双组分合金填充聚合物材料体系的流变性进行了研究。

The flow curves of cis 1,4-polybutadiene prepared by four different catalytic systems have been measured by a capillary rheometer.

用毛细管流变仪测定了四种不同催化体系高顺式1，4-聚丁二烯的流动曲线。

The revised coefficients of rheology survey data on power-law, Bingham and Cas-son fluids are produced on the principle of rheometer.

根据旋转粘度计设计原理导出幂律、宾汉、卡森等非牛顿流体流变性测试结果的修正系数。

The gel degree of rigid PVC is determined by means of constant pressure capillary rheometer, and this method has proved to be feasible.

采用恒压式毛细管流变仪测量了硬pvc材料的凝胶度，结果证明方法可行。

The high speed extrusion behaviors of several polyolefine melts were investigated by a double capillary rheometer of constant speed type.

采用恒速型双毛细管流变仪研究一批聚烯烃熔体的高速挤出行为。

The rheological behavior of polyamic acid solution and the influential factors on its viscosity were studied with a cone-plate rheometer.

采用锥板粘度计研究了聚酰胺酸溶液的流变性能及其粘度的影响因素。

Datas obtained by torque rheometer should be considered as a scientific basis to determine the process parameters for thermoset plastics.

用转矩流变仪得到的热固性塑料固化过程中的流动和固化的信息，为制订热固性塑料的固化工艺提供科学依据。

The RM-200 torque-rheometer was used to study the rheological properties of the rigid low-foamed poly(vinyl chloride)(PVC) in this paper.

用RM-200转矩流变仪对不同配方的硬质低发泡聚氯乙烯（PVC）的流变性能进行了分析。

Transmission electron microscope, laser particle scanning analyzer and rheometer were adopted for qualitative and quantitative evaluations.

采用透射电子显微镜、激光粒度分析仪、流变仪对微球进行了定性和定量的评价。

The rheological behaviors and curing properties of 213# phenol resin were studied using a rheometer and a differential scanning calorimeter.

利用流变仪和热分析仪对213#酚醛树脂的流变行为和固化反应进行了研究。

New methods of preparing novel polymer and modifying polymer are grafting of polymer by reactive extrusion and in the Haake torque rheometer.

综述了利用哈克转矩流变仪及采用反应挤出法制备接枝聚合物的特点及接枝体系的选择。

Rheological property of concentrated orange juice were studied at different temperatures and different concentrations by the rheometer AR500.

采用AR 500流变仪对不同浓度的浓缩柑橘汁在不同温度下的流变学特性进行了研究。

Potato starch was mechanically ground by ball milling. The rheological properties of differently micronized products were studied by rheometer.

通过机械球磨对马铃薯淀粉进行粉磨，采用流变仪研究了马铃薯淀粉及其不同微细化程度产物的糊的流变特性。

The relationship between the melt fracture and the non-linear viscoelasticity for PE-HD, POE, and PE-LLD was studied using a capillary rheometer.

采用毛细管流变仪等仪器研究了一类聚乙烯熔体的挤出畸变与熔体非线性粘弹性的关系。

The end pressure loss of LLDPE melt in short die extrusion and factors affecting the pressure loss were investigated by using a capillary rheometer.

应用毛细管流变仪，考察了线性低密度聚乙烯(LLDPE)熔体于短口型挤出流动中的末端压力损失及其影响因素。