Fifth, in the bearing seat bearing assembly hole size, the shape, the precision not good situation cannot display the optimum performance.

第五、轴承座轴承装配孔尺寸、形状、精度不好的情况下不能发挥出最佳性能。

A load bearing assembly (30) of an elevator system (20) includes a plurality of load bearing members (34) that each have a selected strength.

电梯系统(20)的承载组件(30)包括多个承载构件(34)，每个所述承载构件具有选定强度。

The number of load bearing members (34) and their associated strengths provide an initial factor of safety for the load bearing assembly (30).

所述承载构件（34）的数量及其相关 强度为所述承载组件（30）提供了初始安全系数。

Tightening down on special tool will push wheel stud out of the hub and bearing assembly flangRemove lug nut from stud and remove wheel stud from flange.

上紧特殊工具，即可将车轮螺桩推出轮毂及轴承组件。自螺桩取下凸缘螺帽并自凸缘取出车轮螺桩。

It incorporates a proprietary Safety-Lock bearing assembly that has been tested to provide additional protection against vibration and installation errors.

它包括一个专有的安全锁轴承装置，已经通过测试，来提供对振动和安装误差的额外保护。

A shield assembly (40) includes the shaft (12) and a shield (40) rotatable with the shaft and positioned intermediate the impeller and the bearing assembly (26).

防护罩组件(40)包括轴(12)和可随轴旋转的防护罩(40)，防护罩位于叶轮和轴承组件(26)的中间。

As the key part of the rotary control head's bearing assembly, the capability of the rotary dynamic seal equipment effects on the using life of the rotary control head.

旋转动密封装置是旋转控制头轴承总成的关键部件，其性能好坏直接影响旋转控制头的使用寿命。

Through analyses on several bearing assembly programs, a pressing technology modification program was selected, and corresponding pressing fixture design was introduced.

通过对几种轴承装配方案的分析，选择出一种较好的轴承压装技改方案，并介绍了其相应的压装夹具设计。

Consequently, the method in the dissertation is proved through calculating the similarity between the numerical simulation data and physical test data of satellite momentum wheel bearing assembly.

通过卫星动量轮轴承组件的数值仿真和物理试验数据的相似度计算实例验证了本文评估方法。

A cover bearing and integral seat bearing guide the stem assembly for precise alignment with the seat.

阀盖轴承和整体阀座轴承引导阀杆总成，实现与阀座的精确定位。

Second, the complete bearing undergoes the strict precise match before the assembly. Cannot exchange in the use spindle foot die space other components.

第二，成套轴承在装配前经过严格的精密选配。不能互换使用锭脚型腔内的其它零件。

The differential is part of the rear-axle-housing assembly, which includes the differential, rear axles, wheels and bearing.

差速器是后桥壳总成的一个部件，后桥壳总成包括差速器、后桥、车轮和轴承。

Finally, eliminate the stain and scrub corrosion, must remove the part when necessary, especially the rolling bearing, the centre of gravity after clean assembly.

最后，消除机体污渍，擦洗锈蚀，必要时须拆下机件，特别是滚动轴承，清洗干净后重心组装。

Fourth, bearing when assembly is not suitable receives the clash and the impact.

第四，轴承在装配时不宜受到磕碰和冲击。

Cup: one of four basic components of the assembled bearing. Also referred to as the outer race; the cone assembly fits into the cup.

外圈：轴承组件的四个基本组件之一，也称作外滚道；内圈装配在外圈里。

Lastly during assembly care is taken to avoid damaging the seals when passing over the keyway or performing bearing surfaces of the shaft.

最后，在组装过程中，当部件通过键槽时，注意避免损坏密封和轴的轴颈表面。

Assembly precision of the electromotor bearing is one of the main elements affecting the electromotor quality.

电机轴承的装配精度是影响电机质量的主要因素之一。

This paper introduces an effective method to improve rotary precision of the spindle by person-controlled assembly and by using foreign precision bearing on the basis of present machining precision.

介绍一种在现有制造精度基础上，利用国外的精密轴承，通过人为干预装配过程来提高主轴回转精度的行之有效的方法。

High speed bearing has high demand in speed of revolution and flexibility, and its usage performance is usually influenced by improper assembly methods.

高速轴承对转速和旋转灵活性要求很高，而装配方法不当常常影响其使用性能。

In order to improve transmission assembly quality, to reduce intensity of Labour, modification of mechanical bearing pressing technology to rear cover assembly was conducted.

为了提高变速器装配质量，减轻工人劳动强度，进行了后盖总成轴承机械压装技术改造。

The fitting precision of motor bearing is one of the main factors influencing the assembly quality of motors.

电机轴承的装配精度是影响电机装配质量的主要因素之一。

Choose the right height can make the bearing spacer after assembly has the required pre-load.

选择合适的隔圈高度可以使轴承装配后具有所需的预载荷。

In order to assembly antifriction bearing (18) in an accurate Angle, the filling groove (34) is out of the range of maximum stress.

为了允许以精确角度组装减摩轴承(18)，填充槽(34)处于最大应力的范围之外。

Various models, clutch pressure plate assembly, platen assembly, release bearing professional build high quality clutch, involving subcompact car pickup trucks, such as more than 500 kinds of models.

各车型、离合器压盘总成，从动盘总成、分离轴承专业打造高品质离合器、涉及微型车轿车皮卡车货车、等500多种车型。

The sorting results have direct influence on bearing clearance quality and assembly efficiency.

分选效果如何将直接影响到轴承游隙质量和装配效率。

The present invention disclosed a vehicular torque converter and method for checking assembly of thrust bearing thereof.

本发明公开了一种车辆用变矩器以及检查其止推轴承的装配的方法。

The bearings at the both ends of the rotating shaft are spherical bearings, and the two bearing seats are well processed assembly parts.

两端的轴承是球面轴承，两个轴承座是已经加工好的组装件。

The discussion for operating conditions of hub bearings, auxiliary bearings of electronic instrument assembly and constant velocity joint bearing has been made.

对轮毂轴承、电器部件辅助轴承和等速万向节轴承的工作状况进行了讨论。

The application of expert system in the spindle bearing combination of machine tool is discussed. By means of the expert system, the CAD of spindle parts assembly drawings can be completed.

用专家系统实现了机床主轴轴承的优化组合和程序流程的自动控制，最后完成了主轴部件装配图的计算机辅助设计。