Ball joint housing made of zinc base alloy.

球头座由锌基合金制成。

Please quote us your lowest price for Ball Joint.

请对对贵公司的球头给我们最低价格。

Failure may happen in ball joint which suffers high temperature and stress.

球铰的温度高，热应力大，容易发生失效。

Ball joint housing is an outer ring of radial spherical plain bearing, made of zinc base alloy.

球头座为向心关节轴承的外圈，由锌基合金制成。

It has series of products such as Tie rod End, Ball Joint, Rack End, Stabilizer Link, Control Arm and so on.

主要有拉杆球头，球头，拉杆，稳定杆，控制臂等一系列悬挂产品。

Dahe is the China patent holder of Ball Joint Handrailing and the drafting company of the Chinese Industry Standard.

大和是球接栏杆中国专利持有人，是中国行业标准的起草人。

The rear of the bike is equipped with a ball joint so that it can move freely following the leaning of the front part.

后面的车配备了球窝接头，以便它能够自由流动的倾向后，前面的一部分。

The ball joint has a substantially annular joint housing (3), in the cylindrical interior of which a ball socket (1) can be arranged.

该球形万向节具有一个基本环形的万向节壳体(3)，在其基本圆柱形的内室里面可以设置一个球壳(1)。

The engineering survey and construction process and method of bolted ball joint net frame are introduced, and good result has been achieved.

介绍了施工现场的工程概况及螺栓球节点网架的施工工艺和施工方法，并收到了良好效果。

Three individually flexing shaving heads are connected by a ball joint system making them swivel, rotate, and pivot with a full range of motion.

三是个别伸缩刀头合作nnected由一个球联合使其旋转，旋转系统，枢纽与全运动范围。

The changing regularity of pressure angle of ball joint and the optimum position region of pressure angle in given rod structure were proved through computer aided analysis.

通过计算机辅助分析，求得了该点压力角的变化规律及给定杆系参数下压力角的最佳变化区间。

Ltd. is a professional manufacturer of suspension control arms for the cars, and Ball joint, tie rod and rubber. Our new factory was built up in Jingdezhen of Jiangxi province.

在江西景德镇市兴建一个工厂，我们的宗旨是集中资金，技术，人才，开发全球汽车零部件新产品，新技术。

Specially manufacture automotive Chassis fittings, Steering parts, Ball joint, Tie rod end, Side rod Assy, Rock and Stabilizer link, Control arm, Idler arm, Pitman arm, Center link cross rod.

专业制造汽车底盘部件和转角及转动部件，产品有：悬挂球头、拉杆球头、控制臂球头、转角拉杆球头、拉杆总成、主邦汰、副邦汰等系列。

It is after all a simple ball and socket joint; it has certain loads imposed on it; it needs reliability over a defined life; it must contain materials suitable for the working environment.

它毕竟是一个简单的球窝关节；它有一定的载荷；它在有限的生命中需要可靠性；它必须包含适合工作环境的材料。

The ODE currently supports the ball-and-socket, hinge, slider, fixed, angular motor, and hinge-2 (for vehicle joints) joint types, among others.

ODE 目前可以支持球窝、铰链、滑块、定轴、角电机和 hinge-2 （用于交通工具的连接）连接类型，以及其他一些连接类型。

They made joints in stone keeping the lintels in place horizontally using a tongue and groove joint and subsequently fixing the upright and lintel with a ball and socket joint or mortice and tenon.

石匠们用楔口连接法将楣石水平放置，将石块连接起来，然后将这些直立的石块和楣石用球窝接头或楔口接头来固定。

It's much harder, they say, to dislocate a screw than a round-ball-and-socket joint.

这种螺纹状的关节与球状关节相比，更难发生脱臼的情况。

The reasons for error cut-in grinding of cage spherical outside surface of ball basket constant velocity joint is analyzed, and the solution for the problem is put forward.

分析了球笼式等速万向节保持架外球面切入磨削误差产生的原因，并提出解决和调整方法，从而进一步推导出调整计算式。

The normal hip is a tightly joined "ball and socket" joint (Figure 1).

正常的髋关节是一个紧密参加“球窝”联合(图1)。

Combined with experimental results, a simplified mechanics model for the elastoplastic analyze of the new type of hollow ball bolted joint is built in the paper.

本文结合试验研究的成果，建立了新型空心螺栓球节点弹塑性分析的简化力学模型。

The operation principle of contant velocity universal joint with double offset ball basket is introduced.

介绍双偏置式球笼等速万向节的工作原理。

Combined with medium pressure steam heat-supply engineering, the applicability of square compensator, ball compensator and rotary joint compensator is discussed.

结合某中压蒸汽供热工程，探讨了方形补偿器、球型补偿器、旋转补偿器的适用性。

The orthogonal experiment design method was applied to study the relationships between solder joint process parameters and reliability of plastic ball grid array (PBGA) component.

基于正交试验设计法对塑封球栅阵列(PBGA)器件焊点工艺参数与可靠性关系进行了研究。

The husky ball players threw all calculations out of joint.

那些体格魁梧的橄榄球队员会把原先的计算统统打乱。