复合材料的弯曲强度和拉伸强度稍有降低.

The flexural strength and tensile strength slightly decreased.

研究了复合材料的拉伸强度 、 冲击强度 、 弯曲强度 、 形态及热性能.

The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.

结果表明：云母可有效提高PP的弯曲强度及模量、悬臂梁缺口冲击强度和耐热性能；

The results show that the addition of mica can enhance the flexural strength, flexural modulus, notched Izod impact strength and heat deformation temperature of the composites;

在侧向纤维方向的材料弯曲强度也可发现相同的趋势。

The similar tendency was also found in the transverse flexural strength of the composites.

研究表明制品在各流动方向上的弯曲强度有很显著的差别。

Results showed that the flexural strength of ESMC parts was different at different direction of fiber orientation.

目的研究不同处理方式对白榴石增强陶瓷的双轴弯曲强度的影响。

Objective To study the effects of different treatment methods on the biaxial flexural strength of hot pressable ceramic.

结果表明，PC的加入可以提高聚合物共混物的拉伸强度、弯曲强度、热变形温度和玻璃态转变温度；

The results displayed that the tensile strength, flexural strength, heat distortion temperature and glass transition temperature could be improved when PC was blended with ABS.

力学性能测试表明，与纯聚乙烯相比，环氧树脂增强聚乙烯材料的弯曲强度有较大提高。

The static test of mechanical properties suggest that the flexural strength of PE/EP is higher than pure PE.

强度性能一般涉及到抗张强度，弯曲强度，耐压强度，抗扭强度，切变强度和疲劳强度。

Strength properties are commonly referred to as tensile strength, bending strength, compressive strength, torsional strength, shear strength and fatigue strength.

同时,测试了该材料的冲击强度 、 弯曲强度和拉伸强度.

The Izod impact strength, the bending strength and tensile strength were tested.