The rigid cover plate is provided with two grout holes.

刚性盖板设置两个灌浆孔。

Reattach cover plate to make an air and water tight seal.

重新固定盖板，并紧密密封防止空气和水通过。

The handle of cover plate is adopted as retractable handle.

盖板把手改为可折叠式。

The injection mould for a duplicator cover plate is designed.

设计了复印机盖板的注塑模具。

Remove all nuts and bolts from cover plate and take off plate.

从盖板上拆卸所有螺母和螺栓，然后将盖板拿开。

In addition, one-inch horizontal cover plate can prevent accidents.

此外，一英寸的板块横罩可有效防止发生意外。

Cooling condition of the market, the developers choose to cover plate.

冷却条件的市场，开发商选择盖板。

Or texture of soft flexible rubber airtight floor drain in the cover plate on.

或用质地软有弹性不透气的橡胶板遮盖在地漏上。

Caution: Do not loosen nuts on cover plate - This will result in loss of pre-charge.

警告：不要松开盖板上的螺母-这样做可能会导致预充气压力的损失。

Original create hit-proof decoration cover plate, make it perfect, luxury and elegant.

独创扇防撞装饰盖板，使外观趋于完美，既豪华又典雅。

Loosen bolts on groove coupler and remove groove couple and cover plate from valve body.

松开沟槽连接器上的螺栓，从阀体上拆卸沟槽连接器和盖板。

Outdoor cable trench are reinforced concrete trench with reinforced concrete cover plate.

室外电缆沟由钢筋混凝土砌成，上面加钢筋混凝土盖板。

Loosen bolts on groove coupler and remove groove coupler and cover plate from valve body.

松开沟槽连接器上的螺栓，从阀体上拆卸沟槽连接器和盖板。

Study on culvert energy-dissipating cover plate in dispersive delivery system is performed.

就分散输水系统中廊道支孔设置盖板这一共性问题，作了较为系统的研究。

If you open the cover plate of your cell phone you'll see a rectangular LCD on its backside.

把手机的盖板打开来，背面就是一整片长方形的液晶萤幕。

The first and second shutter blades, the partition plate, and the cover plate have conductivity.

快门基板，其可转动地支撑所述第一快门叶片和所述第二快门叶片；

The prestress of steel girder by high strength cover plate can raise stiffness and save steel, with simple configuration.

焊接高强钢盖板的预应力钢梁构造简单，刚度较大，节约钢材，是一种值得推广的结构型式。

Parts and components products include: chassis, cover plate, stamped steel, brush components, electrophoresis rotor, etc.

零部件产品有：机壳、盖板、冲片、电刷组件、电泳转子等。

Cable entrance cover plate: interchanged and removed easily, convenient to open cable entrance hole and conducting cable.

可相互替换，移动方便，易于开孔进线和电缆导入。

Bladder is attached to tank at both ends. To remove bladder from tank remove all bolts from cover plate and take off plate.

内胆附在膨胀罐的两侧。要从膨胀罐上拆卸内胆，就要先从盖板上拆卸所有螺栓并将盖板拿开。

Cable inlet for bottom elevated cover plate: the cover plate can be dismounted to drill holes and the seal rings are provided.

底部凸台盖板进线，盖板可预先拆下开孔，并配有密封圈。

The utility model provides a heating jacket sheathed on a cover plate of a seat closet to heat a seat ring of the seat closet.

本实用新型提供了一种套装在坐厕盖板上的对座厕座圈进行加热的加热套。

Otherwise, the bracket should be placed in the bottom of the main horizontal cover plate near the main beam two points to high.

否则应把支架垫在主梁的下水平盖板靠近主梁两点变高处。

The protection part comprises a joint. By means of at least a broken line, the protection part is connected with a cover plate.

保护部包括一接头，它借助于至少一折线与一罩板相连接。

The research work indicates that this influence of aft cover plate shows different appearances with different operation conditions.

研究表明，后遮流板结构尺寸在不同压差条件下对指尖密封迟滞特性和刚度的影响表现出不同的特点。

The fence panel can be further equipped with a lower cover plate, and the steel plate is fixedly connected with the lower cover plate.

本实用新型还可设置下盖板，钢板与下盖板固定连接。

As such a technical scheme is adopted, the cover plate is made with the plastic suction art and the production cost of parts is reduced.

由于采用这样的技术方案，采用吸塑工艺制作该件，可以使零件的制造成本得到降低。

The complex pump body in the pump is fabricated by that a pump body, a whorl casing, a liquid inlet pipe, and a cover plate are assembled.

泵中复杂泵体由泵体、涡壳、进液管及盖板等部分组装而成。

The forming technology for the cover plate, the structure of the die for the cover plate and the die manufacturing process were introduced.

文章提出了在钛复合板压力容器的焊接中采用盖板敷设焊接，并具体介绍了盖板的结构及其焊接方法。