ASME, Boiler and Pressure Vessel, Product Certification, Code and Standards.

锅炉压力容器，产品认证，规范和标准。

Answer: Design questions which are consulting in nature cannot be answered by ASME.

答复：这是一个好问题。在两个不同的条款解释中答复了此问题。

The new Control-Disk valve meets API, ASME and EN standards, making it suitable for use in all world areas.

新的控制盘阀满足的API 、美国机械工程师学会和EN标准，使之适用于世界所有地区。

Its oil is of the asme fatty acid composition as olive oil or tea oil, and its meal could be used as food or feed.

其油脂的脂肪酸组成与橄榄油、茶油相似，是良好的食用烹调油。

At the asme time the most high-quality after-sales service and fastest delivery time is our biggest commitment to customers.

同事以最优质的售后服务和最快捷的交货时间是我们对客户最大的承诺。

Suggestions for revisions or clarification to this Guide should be directed to the ASME Director, Accreditation and Certification.

为修改或澄清，以本指南建议，应直接向美国机械工程师协会董事，鉴定和认证。

Line centering clips provide for versatility to mount and align the same wafer style valve body in different piping configurations (ASME and en ratings).

线围绕剪辑提供多功能贴装和赞同同一晶圆式阀体在不同的管道配置(美国机械工程师学会和EN评级)。

Provide boiler safety valves with a capacity at least equal to the recommendations of the boiler manufacturer and of the ASME Section 1 Power Boiler Code.

提供锅炉安全阀且达到锅炉制造商指定的容量以及美国机械工程师协会章节1中关于锅炉的规定。

Based on the simple introduction of BC95 378 design of layered vessels using flat ribbon wound cylindrical shells, some problems in making ASME codes were analysed and discussed.

在简要介绍BC 95 - 378《扁平绕带式压力容器设计》主要内容的基础上，对规范制订中的有关问题作了分析讨论。

The vessel is registered with the National Board of Boiler and Pressure Vessel Inspectors, meets requirements of CSD-1 of the ASME Code, and is built to Section IV of the ASME code.

该容器已经通过国家锅炉及压力容器检验协会的检验，符合美国机械工程师协会CSD-1的要求，满足美国机械工程师协会标准。

This method is used to evaluate the demonstration case in ASME PTC6-1996, the combined standard uncertainty of turbine heat rate obtained is close to results giving in the standard.

对于像汽轮机热耗率等这样复杂的间接测量问题，采用传统不确定度传递律法进行合成不确定度的评定是很困难的。

An attempt was made to define the safety grade of flanged connections according to target leakage rates described in domestic gasket standards and tightness rates of joints stated in PVRC of ASME.

根据国内垫片标准规定的泄漏率指标和美国PVRC对连接系统划分的紧密度等级，尝试定义了法兰连接系统的安全性等级。