Top view of countersunk slotted screw.

圆头一字槽螺钉的俯视图。

Top view of countersunk slotted screw.

方头螺钉的俯视图。

Hexalobular socket countersunk head tapping screws.

沉头内六角攻丝螺钉。

Name two head styles of machine screws that are countersunk.

沉头机螺钉有哪两种头型？

Hexagon socket head cap screws with countersunk head screws like.

角紧顶螺钉固定在底座上。

Countersunk rivet symbol. Use in conjunction with other rivet ends.

埋头铆钉符号。与其他铆钉端点结合使用。

Side view of raised countersunk posidriv screw with adjustable thread length.

螺纹长度可调整的半埋头十字槽螺钉的侧面图。

Top view of countersunk slotted screw. Selection box represents thread diameter.

埋头一字槽螺钉的俯视图。选择框代表螺纹直径。

Features Rapid and simple calibration-setting master for plain and countersunk holes provided with each gage.

特点快速简便的校准-每一款孔规为使用者提供普通孔和盲孔进行校准设置。

In the countersunk caseless cartridge, the burning at ignition allied to the matching of charge configuration.

埋头无壳弹的点火、烧与装药结构的相互匹配有着十分密切关系。

Specification: flat head cold-flow model, countersunk head cold-flow model, primary drawing mould, pole-shorten model, etc.

规格：平头冷墩模、沉头冷墩模、一序冲顶模、缩杆模等。

Rod guide, for 8mm round rods. Screwed onto a welded stud or countersunk screw. Lower version (200-3606.3) also as shown in the samples of application.

圆柱杆的连杆导槽，旋在焊接螺钉或埋头螺钉上。应用示例图中还画出了较低型（200-3606.3）

The front cover exactly matches this shape and also has a raised circular area that fits into a matching countersunk area of the block in front of the main bearing.

封面完全匹配这个形状和也提出了圆形区域，可以成为一个匹配埋头面积块前面的主轴承。

Baosteel should not only "countersunk cart", even want "looking up at the sky" to adjust the thinking, strategy and the corresponding program, so as to adapt to these changes.

宝钢不仅要“埋头拉车”，更要“抬头看天”，及时调整思维、策略和相应的规划，以适应这种变化。

By removing the four countersunk screws that maintain exact alignment, the orientation of the piston rods and tooling plate can be rotated 90 degrees without cylinder disassembly.

通过消除四个埋头螺丝保持精确一致，该活塞杆和模具板可旋转方向没有拆卸气缸90度。