A dwell time is allowed.

允许停留时间。

It found that when dwell time rose 1% sales rose 1.3%.

这项研究发现，驻留时间每提高1%，销量会相应上升1.3%。

Stainless steel baffles for optimum dwell time and treatment;

获得最佳停留时间和治疗，不锈钢挡板；

The influence of dwell time for alloy performance is weak comparatively.

在同样的压型压力下，保压时间对合金性能的影响较弱。

The idea is to boost "dwell time" : the length of time people spend in a store.

这个主意就是为了延长购物者的“逗留时间”：人们花在商店里的时间。

Dwell time: The duration of time a ball stays on a racket during a stroke.

停球时间：击球过程中球驻留在球拍上的持续时间。

The dwell time is the period in which the user's finger holds the key down.

停顿时间是用户的手指按住按键的时间段。

The time that the beam remains on a given target pixel is called the dwell time.

离子束停留在一个指定点像素的时间叫做停留时间。

The average value for each key dwell time for the entire buffer is computed and returned.

将计算并返回整个缓冲中的每个按键停顿时间的平均值。

Too often, basic TVC's are seen running on high impact but low dwell time OOH sites.

我们经常看到很多在户外高冲击力但等待时间不足的点位上播放电视广告的情况。

If I test right up until the last thing I say, I don't think that gives you enough dwell time.

如果我正好测试我刚刚讲过的东西，我并不认为我会给你们足够的思考时间。

The selection of nip width and dwell time can be related to sheet basis weight and speed.

选择宽压区和停留时间可以根据纸幅有关的定量和速度。

The are of the couple curve of the mechanism is made use of to control the length of dwell time.

利用机构连杆曲线上的圆弧段来控制停顿时间的长短。

These days American units get nothing like the recommended 2:1 ratio of dwell time to deployment.

近来，美军作战单位从未得到类似推荐驻军的比例为2：1的轮休时间。

An average dwell time method is introduced into linear switched delay systems for the first time.

首次使用平均驻留时间方法研究线性切换时滞系统。

Show that design condition of switching periodic under dwell time of all subsystems are equalization.

同时当各子系统的驻留时间均等时，得到了切换周期的设计条件。

To measure the dwell time between sending and the reflection of a micro wave by the surface of the medium.

测量发射到介质表面微波反射回来的滞留时间。

Conclusion Expert pilots demonstrates more frequent fixations with shorter dwell time than novice pilots do;

结论高级飞行员比学员具有更频繁地注视和更短地注视时延（停留）；

The effects of temperature and strain dwell time on properties of the alloy were analyzed with microstructure observation.

结合对合金微观变形结构的观察，分析了温度、应变保持时间对合金低周疲劳性能的影响。

Conclusion the dwell time, object size and object space are all important to optimize the HCI design based on eye tracking.

结论驻留时间、对象大小和对象间距均为优化基于视线追踪的人-计算机界面设计的主要参数。

This product is thickened to provide maximum dwell time on vertical surfaces such as oven walls, substructure beams, and grates.

增稠的配方延长了表面浸透时间，可垂挂于烘房墙壁，基梁和网格板盖。

A dwell time algorithm for the magnetorheological finishing (MRF) of the small axis-symmetrical aspherical surfaces is described.

介绍了一种基于代数算法的回转对称非球面计算机控制表面成形的驻留时间算法。

The effects of the dwell time, strain rate, strain amplitude and their histories on the cyclic deformation behavior are investigated.

研究了在具有不同保持时间、不同应变率、不同应变幅值及其历史对材料的循环变形行为的影响。

Once the dwell time has elapsed the concentrate composition is diluted with water, and the resulting sanitizing composition can be used.

一旦停留时间过去，浓缩组合物用水稀释，可使用产生的消毒组合物。

For a class of switched systems a lower bound on the dwell time of switching is explicitly calculated which guarantees input to state stability.

对于一类常见的切换系统，计算出保证输入对状态稳定性的切换停留时间的下界。

The MP7000 stores bespoke and standard music programmes that entertain and inform your customers, increase dwell time, loyalty and drive sales forward.

商店的MP7000定制和标准的音乐节目的娱乐，并告知你的客户，增加停留时间，忠诚度，并销售前进。

The invention incorporates four main variables, dwell time, chain length, chain speed and the number of closed die cavities in simultaneous engagement.

本发明引入四个主要的可变量，停 留时间、链长度、链速度以及处于同时接合状态的闭合的模腔的个数。

Each string passed to mkpasswd is built level by level from a single key dwell time all the way up to a dwell time for each recorded letter in the user name.

传递给mkpasswd的每个字符串都是从单个按键停顿时间一直到用户名中每个记录字母的停顿时间逐级构建的。

The machine uses computer control via softkeys measure the light intensity can be adjusted , and can test force dwell time , 7 -inch color touch -screen display.

该机采用微机控制，通过软键能调节测量光源的强弱，并能试验力保持时间，以 7 寸彩色触摸屏显示。

To achieve the deterministic removal of surface material, the NC code would be combined with dwell time to control the dwell time of each point on the polishing path.

将生成的NC代码和驻留时间相结合，控制抛光轨迹上各点的驻留时间，实现抛光工具在工件表面材料的确定性去除。