The plastic base can be provided with a sounding circuit.

在塑料底座内可安装发声电路。

Microscopic needle-shaped crystals of herapathite are embedded in a plastic base.

将碘硫酸奎宁的微观针状晶体嵌于塑料片基之中。

The utility model discloses an assembled plastic base steel ring which comprises a ring-shaped base made up of plastics.

本实用新型公开了一种组合式塑料座钢领。

Wonderful unscramble: This wrist expresses the argent and plastic base of park rectangle to go up, base surface shows arc slightly.

出色解读：这款腕表置于长方形的银色塑料底座上，底座表面略呈弧形。

By applying this coating material over a plastic base layer, there can be obtained a gas-barrier multilayer body having a gas-barrier layer.

通过将该涂料涂布在塑料基材层上，可以得到形成有阻气层的阻气性层叠体。

The utility model has translucent soft plastic faceplate, which can be stuck on the glass surface directly and a plastic base plate stuck with the faceplate.

本实用新型是由一块直接与玻璃表面粘贴的透明的软质塑料面板，和与面板粘贴在一起的塑料底板组成。

The Recoilable-Belt Rail with plastic base , also referred to as "one meter line" in China, is a retractable isolation rail extensively applied in banks, hospitals , metro and other public places.

塑料座式伸缩隔离带：又称一米线，就是能够自由伸缩连接的隔离带，被银行、医院、地铁等商务和公共场合广泛使用。

The Mount Sinai researchers also warned against, Bisphenol-A, a substance present in many food containers, plastic water and baby bottles (indicated by a number 7 printed on the base).

西奈山医学中心的医生还警告到，一种名为双酚a的物质普遍的出现在许多的食物容器之内，其中包括了塑料水瓶和婴儿的奶瓶(表面印有数字7)。

Measure the dimensions of your flash gun’s head and mould the base to fit – you may need to make a few cuts and bends in the opaque plastic to get the right size.

量一下你闪光器头部的尺寸，把剪下来的底儿修理一下，可能要做适当的弯曲，以使它们匹配。

The part of a fixed base raised awareness of plastic feet, toothbrush is directly inserted in the above can charge.

而底座凸出的部分意识一个固定作用的塑料脚，牙刷就直接安插在上面就能充电了。

There are several storage methods for chinese toon, such as booth storage, base dipping storage, plastic bag storage, refrigeratory storage.

香椿贮藏方法有摊贮、浸根贮藏、塑料袋贮藏、冷库贮藏和冷冻保鲜贮藏。

Base on the structure plastic dynamic response analysis and blade deformation process analysis, the factors such as length of blade, rotate speed of breaking were considered.

根据结构塑性动力学原理进行响应分析和叶片变形过程分析，并对影响叶片卷曲形状的飞断转速、抗弯刚度等参数进行了考察。

Base material basically has two kinds big, it is plastic film, it is paper.

基材主要有两大类，一是塑料薄膜，一是纸。

Combining the engineering examples, the construction method to process soft terrain base using overload and prepressed plastic drainage plate is introduced in this paper.

本文结合环胶州湾公路工程实例，介绍了塑料排水板超载预压法处理软基的施工方法。

A new calculation method, base the method of equivalent additional plastic loads on modes of vibration superposition method is studied.

研究一种新的计算方法——以振型叠加法为基础的等效附加塑性荷载法。

The method of add Loading precompression on the plastic plank to work on the weak base is the one of the basic way to the stuffing sea area.

塑料排水板加载预压法对软弱地基进行处理，是近年来对填海区地基采用的基本方法之一。

It is used as a base for lake pigment and used as a inert pigment for paint, ink and cosmetics as well as in a large range of applications in plastic industry.

它被作为一个基地为湖色素使用，使用作为一个惰性颜料为油漆，墨水和脂粉以及在一个大应用范围在塑料行业。

On the base of tests, two kinds of measuring methods adopting different standard distance of the elastic modulus of plastic concrete have been analyzed and a more reasonable method has been found.

在试验的基础上分析了塑性混凝土弹性模量采用不同标距的两种测试方法，得出了测试塑性混凝土弹性模量较为理想的方法。

Stands are constructed of durable thick-wall, polyethylene plastic with a structurally reinforced post and fillable base for maximum stability.

架子设计为厚壁的，聚乙烯类塑料材质的加筋立柱，和保持最大稳定性的地板。

The plastic can have a base polymer that is a blend of two or more polymers and various thermally conductive fillings.

塑料可具有基础聚合物，基础聚合物为两种或多种聚合物与各种导热填料的混合物。

Connecting with the produce practice, in the process of vacuum evaporation deposition decorative film, the action of base paint on plastic surface has been introduced simply in this paper.

结合生产实际，本文简单介绍了塑料表面真空蒸镀装饰膜的生产工艺中，底涂料涂装的作用。

On the base of defining a side hole and an inclined hole in plastic structure, both are compared on the hand of mold design.

在对塑料制件结构中的侧孔和斜孔加以界定的基础上，从模具设计角度对两者进行了比较。

Linyi is located in west Shandong, Lunan, the largest in Northern Jiangsu plastic mold production base.

地处山东临沂城西，是鲁南、苏北地区最大的塑料模具生产基地。

The specimens made from Bayer tooth, thermosetting plastic, copper base alloy, titanium and its alloy have relatively good wear resistance as well and are thus idea prosthetic materials.

拜尔牙、热固塑料、铜基合金、钛及钛合金是较为理想的牙科修复材料 ；

A plastic closure includes a base (30) molded as one piece with a lid (28) and integrally connected to the lid by a hinge (32).

一种塑性罩包括与盖(28)模制成整体并且通过铰链(32)一体地连接到所述盖的基体(30)。

This will allow the annual output reached 500 million tons of plastic, Thailand, Asia's largest production base of plastic.

这将使泰国塑胶年产量达到500万吨，成为亚洲最大的塑胶生产基地之一。

The results show that the great plastic yield areas and pull failure areas are formed in the base structure with caved area extends.

结果表明，随矿岩崩落开采，崩落区下方岩层出现较大范围的塑性破坏区和拉破坏区。

The bond between inner plastic lining and steel tube base metal of that steel plastic clad tube is good, and the service life is long.

所生产的钢塑复合管道其内衬层与钢管基体贴合好、使用寿命长。

The foam plastic ski comprises an inner core, a base plate and a surface plate.

所述泡塑滑雪板包括有内芯、底板和表板。

Plaster mould precise casting process was used to manufacture zinc-base alloy mould for plastic wares production.

介绍一种用于制造塑料制品生产用锌合金模具的石膏型精密铸造工艺。