Bellows are the basic units of an expansion joint.

波纹管是组成膨胀节的基本元件。

The bridge expansion joint is an important part of vehicle system.

桥梁伸缩装置是桥面的重要组成部分。

Using the concept of fatigue test to design a modular expansion joint.

采用疲劳试验概念设计模数化伸缩缝。

Composition cork - Expansion joint fillers - Specifications, packaging and marking.

复合软木。膨胀连接填充料。规范、包装和标记。

The large displacement expansion joint is an expansion device between the main bridge and the approach.

大位移伸缩缝是连接主桥与引桥的伸缩装置。

It also presents a new type of prestressed elastic neoprene tube expansion joint used in highway decks.

文中着重介绍一种新型伸缩缝——预应力弹性胶管伸缩缝的构造、制作与安装以及试验和使用情况。

It is concluded that the repaired corrugate-expansion joint can restore its orinal quality and working-life.

经实际应用证明，修复后的波纹补偿器能够达到原有的质量性能及使用寿命。

Measures of crevices preventing such as the control of temperature and interval of expansion joint are given forth.

提出了温度控制与伸缩缝最大间距控制等防止引起裂缝的措施。

Setting bridge expansion joint will not only influence the comfort of riding, but also cause damage to bridge in different degrees.

桥梁伸缩缝的设置不但影响行车的舒适性，而且容易造成桥梁不同程度的破坏。

But how to estimate and maintain the bridge expansion joint is an urgently problem to be solved by the manage department of the highway.

桥梁伸缩装置的破损程度如何评价，如何养护维修，是公路管理养护部门急需解决的问题。

This paper introduces the experience of installation for metal bellows - expansion joint, which is very useful for practical construction.

介绍安装金属波纹管膨胀节的实际施工经验，它有较大的实用意义。

Measures for adopting bellows expansion joint have been proposed to meet the requirement of allowable force in the inlet of pump pipeline.

为满足泵管口的受力要求，提出了采用波纹管补偿器时应采取的措施。

Reason of invalidation failure was analyzed on expansion joint of second stage exchanger of mixture hydrogen in semi-regenerative reformer.

分析了半再生重整装置二段混氢换热器膨胀节失效破裂的原因。

The connection between separator, furnace and back-end flue adopts stainless steel nonmetal expansion joint which can bear high temperature.

分离器与炉膛及尾部烟道之间的联接采用耐高温非金属膨胀节。

The results show that the early failure of the corrugation expansion joint was results from the stress corrosion cracking in the components.

结果表明，波纹膨胀节发生早期失效是由于构件发生应力腐蚀开裂所致。

Expansion joint is adopted at the lower extreme of recycling machine, water cooled panel, platen superheater and the place piercing through roof.

返料器下端及水冷屏、屏式过热器穿过炉顶处均采用膨胀节。

This article gives detail expatiation on pattern selection and performance of corrugated expansion joint used on flue gas energy recovery system.

对烟气能量回收系统波纹管膨胀节的选型及特性作了较全面的阐述。

Abstract: the article in view of the highway bridge expansion joint device installation process, quality control, etc are analyzed and discussed.

摘要：文章针对就公路桥梁伸缩缝装置的安装工艺、质量控制等进行了分析与探讨。关键词：桥梁；伸缩缝；施工技术；质量控制。

The failure phenomenon, reasons and actual examples of corrugated expansion joint are introduced in this paper. And the failure reasons are analyzed.

介绍了波纹膨胀节失效的现象、原因及实例，并对失效的原因进行了分析。

For MSCL and MHWH, the setting up of expansion joint and anti-thrust ring will not much affect the stress distributions of SC and surrounding concrete.

无论是对于垫层方案或是保压方案，是否设置伸缩节和止推环对蜗壳应力状态影响均较小。

The roadway expansion joints are of molded rubber segmental expansion joint system or Steel Finger type expansion joint system detailed on the Drawings.

路面膨胀缝为模塑橡胶分节膨胀缝系统或钢指型膨胀缝系统，详见图纸。

Finally, brings forward protective measures for expansion joint breakage and leakage caused by corrosion, which impacts the unit on safe and stable operation.

对出现的影响装置安稳运行的膨胀节破损及腐蚀泄漏问题，提出了技术防护措施。

Several standards for the design of expansion joint were compared in terms of application scope, stress evaluation, buckling check and fatigue life calculation.

对几种常用膨胀节设计标准在适用范围、应力评定、失稳校核和疲劳寿命计算等方面进行了对比分析。

This paper presents some information about the design and application of bellows type expansion joint used in heat-supply network, taking Yangquan Power Plant No.

以阳泉第二发电厂新建工程为例，介绍了厂区供热管网中波纹管补偿器的设计及应用情况。

Expansion joint: to meet the deformation of foundation, expansion and construction requirements play, prevent play a change in temperature in transverse crack produces.

伸缩缝：为适应地基变形，管身伸缩及施工要求，防止管身在温度变化时产生横向裂缝。

So analysis the influencing factors and calculating measure of bridge expansion joint, makes for developing the new product and reasonable selecting of expansion joint.

因此从多方面分析影响伸缩量的因素和计算方法，有助于研制新产品和选择合理的伸缩装置。

Analysis the basic factor of influencing quantity of expansion joint, including the seismic load and wind load, the calculating formula and measure of expansion amount.

分析桥梁伸缩装置伸缩量的基本影响因素，包括地震荷载和风荷载，国内外伸缩装置伸缩量的计算公式和方法。

Adopting tiny extended concrete to build the excessive regulation length basement without setting expansion joint for temperature is an economical and efficient design.

故超长地下室采用微膨胀混凝土浇筑而不设温度伸缩缝是一种经济、有效的措施。

Expansion joints due to large aluminum alloy temperature deformation, to make the curtain wall has enough deformation servo, curtain wall pillar setting expansion joint.

伸缩缝由于铝合金温度变形较大，为使幕墙有足够的变形随动性，幕墙立柱需设置伸缩缝。