Serial port Settings (0a).

串口设置(0 A)。

Select Serial port setup.

选择serial port setup。

Listing 2. minicom serial port setup menu.

清单2 . minicom串行端口设置菜单。

Initialize serial port (if present on the target).

初始化串行端口(如果在目标上有的话)。

Typically, you connect a serial port to a serial device.

通常，将串行端口与串行设备连接。

Command-line error: Invalid port for serial port mapping.

命令行错误：串行端口映射的端口无效。

If your host system has no serial port, use a DB9-to-USB cable.

如果您的主机系统没有串行接口，使用DB 9 - to - USB电缆。

Set the serial port connecting the host to the device under test.

将连接主机的串口设置为接受测试的设备。

If your mouse USES a serial port, it helps if you know which port.

如果你的鼠标使用一个串行端口，如果你知道哪一个移植，它帮助。

Good, we all hope to see, on the RS-485 and the knowledge of the serial port.

很好地，希望大家都来看看，关于RS - 485方面的知识和串口方面的。

In the next dialog are options relating to the onboard serial port and debugging LEDs.

下一个对话框中是与板上序列端口和调试LED相关的一些选项。

This is a serial communication example, a simple serial port to accept this data.

这是一个串口通讯的例子，实现简单的串口接受发送数据的功能。

Set the IP address of each controller using the serial port at the back of each enclosure.

使用每个封装背面的串行口设置每个控制器的IP地址。

This is a serial port control of a program, very good program only for your reference.

这是对串口的控制的一个程序，很好的程序仅供大家参考。

One common problem is that the null-modem cable could be connected to the wrong serial port.

一个常见的问题是，空调制解调器电缆可能会被连接到错误的串口。

Protocol also handles the sending and receiving of messages using a datagram or serial port connection.

Protocol还处理使用数据报或串行端口连接的消息发送与接收。

A serial port that identifies the serial port on the build server to which the base station is connected.

一个串行端口，标识构建服务器上与基站连接的串行端口。

A device attached to a serial port, such as a mouse or a modem, USES the device associated with that port.

对像一个鼠标或一台调制解调器这样的一个串行端口的一个装置附件，使用与那一个埠有关的装置。

A desktop or laptop computer with a serial port (see the sidebar Notes on host platforms for more information).

带串口的桌面计算机或笔记本计算机(更多信息见边栏关于主机平台的说明)。

Through this information, you can grasp the profound serial port and voice technology and programming skills.

通过这一资料，你可以深刻的掌握串口与语音的编程技术和技巧。

To activate the serial port communication for kernel debugging, you need to modify the same kernel configuration file.

为了激活串行端口通信以进行内核调试，您需要修改同一个内核配置文件。

Software designed divide into three model: initialize, serial interruption service programming, serial port selected.

软件设计分为：初始化、串行中断服务程序、串行口选择三个模块。

Like a serial port, each USB port on a computer is assigned a unique identification number (port id) by the USB controller.

像串行端口一样，计算机上每一个usb端口都由US b控制器指定了一个惟一的标识数字(端口id)。

Connect the USB or RS232 output directly to the serial port on your PC or Laptop, or by dial-up connection through modems.

连接usb或rs232直接输出到您的电脑或笔记本电脑，或通过调制解调器拨号连接的串行端口。

I found a reference on a forum (see Resources) to someone who supposedly wired up a serial port, so that might be possible as well.

我在一个论坛中发现了一篇参考文章（见 参考资料），适于想要连接串口的用户阅读，因此这种功能也是可用的。

This is particularly useful if you have a chatty kernel but a bandwidth-constrained console device (such as over a serial port).

如果您拥有一个非正式内核而又使用有带宽限制的控制台设备（如通过串口）， 那么这非常有用。

In the real world, RFCOMM should be used when you want to take a traditional serial port application and make it Bluetooth-enabled.

在现实世界中，如果想使用传统的串口应用程序，并让它能使用蓝牙，就应当使用RFCOMM。

RFCOMM is known as the virtual serial port protocol because it allows a Bluetooth device to simulate the functions of a serial port.

RFCOMM称作虚拟串口协议(virtual serial port protocol)，因为它允许蓝牙设备模拟串口的功能。