查询
1 词典释义:
chain drive
时间: 2025-05-08 23:16:05

n.链传动(系统)

双语例句
  • Remove chain drive wheel from crankshaft.

    从曲轴上拆下链条驱动轮。

  • Fit chain drive sprocket on the crankshaft.

    将链条驱动链轮安装到曲轴上。

  • It is interlocked with the crankshaft via the chain drive.

    它通过链条驱动机构与曲轴互锁在一起。

  • The oil pump is driven by a chain drive on the crankshaft.

    机油泵由曲轴上的链条驱动装置来驱动。

  • The chain drive is on the power output side of the engine.

    链条驱动位于发动机的动力输出侧。

  • Main types and causes of roller chain drive are discussed.

    本文讨论链传动的振动的主要类型和引起振动的主要原因。

  • This is fitted in the cylinder block and is driven by the chain drive.

    机油泵安装在气缸体中,由链条驱动进行驱动。

  • It synthesizes the advantages of belt drive, chain drive and gear drive.

    它综合了带转动、链转动和齿轮转动各自的优点。

  • Camshaft from the crankshaft through the timing belt or gear or chain drive.

    凸轮轴由曲轴通过齿形带或齿轮或链条驱动。

  • If there are noises in the chain drive area replacement of the individual parts is recommended!

    如果链条驱动区域有噪音,建议更换单独的零件!

  • The chain drive consists of a duplex roller chain which drives both intake and exhaust camshafts.

    链条驱动机构包括一条双排辊链,通过它来驱动进气和排气凸轮轴。

  • In the design of noncircular chain drive, the key problem is the design of pitch line of noncircular chain wheel.

    在非圆链传动的设计中,一个关键问题就是非圆链轮节曲线的设计。

  • Kinematic characteristic of cable supporting articulated chain drive is an important theoretical basis for designing.

    运动特性是设计电缆支承拖链传动的重要理论基础。

  • "Jumping over Teeth" in roller chain drive has a strong impact on smooth running and life of drives. So it must be averted.

    滚子链传动中的跳齿现象严重地影响到传动的平稳性和寿命,因此必须设法避免。

  • The key is there are a speed rate between front wheel and back wheel to the chain drive of common bicycle, what of you design ?

    关键是普通自行车的链传动前后有个齿轮的速比,你这个是多少?

  • All transmissions part changes from chain drive structure to synchronized tooth belt, which has more smooth transmission and less noise.

    所有传动部件改以往的链条传动为同步齿形带传动,其传动更平稳,噪声更小。

  • This paper introduces the program desks of the roller chain drive CAD system and the drawing of the chain wheels' part drawings and so on.

    本文介绍滚子链传动CAD系统的程序设计,以及链轮零件图绘制等内容。

  • Like the minimalist theft-proof bicycle by Chris Boardman, the Nulla has no hubs or chain drive for perhaps the sleekest, most futuristic look yet.

    就像Boardman的最简防偷自行车,这辆车也没有拉幅和传动链,这也是它看起来超现代的原因。

  • The meshing theory and application of the dual meshing silent chain drive are investigated to reduce the polygon movement and the meshing contact.

    本文通过分析齿形链传动过程中存在的多边形效应和啮合冲击,开展了双面啮合齿形链传动啮合理论与应用研究。

  • 8226; Product description: Automatic fire damper blade roll forming machine run by chain drive types, it can suit different production requirement.

    产品说明:全自动叶片成型设备墙板链条式传动,可以适合不同企业的生产要求。

  • This paper briefly reviews several calculation methods for roller chain drive, and discusses calculation principle of finite service life for roller chain.

    本文扼要评述了几种链传动计算方法,讨论了钻机链传动的有限寿命计算原理。

  • In the process of the silent chain drive used as the timing transmission in motor, the chain always suffers from meshing impact and waving for polygon action.

    在发动机正时机构的齿形链传动中,由于存在多边形效应,链条中心线上下波动,链板啮入轮齿时存在啮入冲击。

  • When the roller chain drive is designed and applied, if only the sag cont rolled in the figured closed area b, "Jumping over Teeth" can be averted, in general.

    在设计和使用滚了链传动时,只要把松边垂度控制在图示的封闭区B以内,一般即可防止跳齿。

  • Application: Food industry, drying, washing, and mechanical parts cleaning, drying, cooling, light-load transportation of objects, do the most basic chain drive.

    应用:食品工业的烘干,洗涤,以及机械零件的清洗,干燥,冷却,轻载物体的输送,可做最基本的链式传动。

  • The paper mainly analyses the chain track sectional profile of non chain drive mechanism of an importing miming machine and researches on its stress state deeply.

    本文着重对引进采煤机无链牵引机构的链轨截面轮廓进行分析,并对其受力进行较深入的研究。

  • Due to the different motorcycle models, motorcycle two way transmission belt transmission, chain drive and three kinds of universal joint drive shaft transmission.

    由于摩托车机型的不同,摩托车二级传动方式有皮带传动、链传动和万向节轴传动三种传动方式。

  • This system can realize the design and correction and making drawing of roller chain drive automatically, and also can realize the integration of design and drawing.

    该系统能实现滚子链传动设计与校核的自动化、绘图的自动化,并能实现了设计与绘图的一体化。