This technology is of great significance for the promoting of I-DEAS in China.

该技术对i - DEAS在我国的推广应用有着重要意义。

In addition, the interference between parts is removed with the interference check function of I-DEAS.

同时，利用I - DEAS软件的干涉检查功能，解决了零部件的干涉问题。

The optimum algorithm of famous I-DEAS software was discussed, then, high-speed car body was optimized.

在讨论了著名的I-DEAS软件的优化算法后，对高速客车车体进行了优化设计。

The 3D templet of them is built by the figure environment of I-DEAS, and parametric figure base is set up too.

通过I-DEAS系统的图形环境，建立制动器总体及零部件的三维设计模板，形成参数化图形库；

Three-dimensional modeling and mechanism simulation of planetary-gear transmission by means of I-DEAS software.

行星齿轮传动装置三维建模、装配及动画处理。

Modeling program of cycloid profile contact finite element was finished by use of parametric function in I-DEAS software.

利用I-DEAS软件本身的参数化设计功能，编写了摆线轮齿面接触有限元建模程序；

Firstly produce the parametrization model in I-DEAS making use of programming tool PRG, then divide the finite element grid.

首先在I - DEAS中利用PRG的特点及关键技术给出了参数化驱动的数学模型，并且划分有限元网格。

According to the characteristic of low-sided weathering steel gondola car body, analytical model is made by I-DEAS software.

本文利用I - DEAS软件，根据低边耐候钢敞车车体钢结构的特点，建立了车体钢结构的力学模型。

In this paper, the mode character of MWM395 engine block is analyzed with the finite element analysis on the platform of I DEAS.

本文应用有限元法在I - DEAS软件平台上对MWM395柴油机机体进行了模态分析。

Using I-DEAS software, finite element analysis of static strength of low-sided weathering steel gondola car body is carried out.

利用I - DEAS软件，对低边耐候钢敞车车体钢结构进行有限元静强度分析。

With the application of scalable parts library based on I-DEAS, the design efficiency is improved and the enterprise resources can be fully used.

基于I-DEAS可扩展零件库的应用，显著提高了设计效率，并使企业的设计资源可以被充分的使用，达到了预期效果。

This artical introduces the pillar structure of Type TY2B Catenary Work Car, analyzes and revises the strength of the structure using I-DEAS software.

介绍了TY 2B型接触网作业车的立柱结构，并利用I-DEA S软件对结构强度进行分析和校核。

The intelligent CAD system for hydraulic systems used in machine tools is a re-development of CAD systems based on SGI workstation and I-DEAS software.

本文就机床液压智能CAD系统的几个关键问题进行了研究，主要是在SGI工作站和I - DEAS软件平台上对CAD系统进行了二次开发。

The latter part made FEM analysis on a muzzle brake and a cradle of some type with the use of I-DEAS. The maximal load value and its location were produced.

后一部分利用I-DEAS软件对某一型号的炮口制退器和摇架进行了有限元分析，求解了所能够承受的最大载荷以及最大载荷位置。

Under circumstances of intellectual economy and our entry into the WTO, the new concepts and i-deas of cost should be added to the application of the human resources.

在知识经济时代和加入WTO的背景下，人力资源使用应当有成本观念和意识。

In this paper, the HXMT and its main components, collimator parts, are simulated on the mechanics conditions at launching state, by using FEM software, ANSYS and I-DEAS.

利用现有有限元程序ANSYS和I - DEAS，本文对硬x射线调制望远镜HXMT的重要部件——准直器单体及其硬x射线调制望远镜HXMT整体在发射时的力学环境进行有限元分析。

Foreign buinessmen did not understand how Hu could make profits because the raw silk was controlled by only him a person and he had to listen to foreigners in deas in the future.

外商认为生丝原料仅操纵在胡雪岩一人之手，将来交易，唯其所命，从何获利？

Based on the new idea and the software Package I-DEAS, a CAD program is developed which can be used for the design of engine crankshafts. An example is presented to verify the program.

由此对i - deas软件包进行了二次开发，编制了发动机曲轴专用CAD软件程序，并用某型号发动机曲轴进行了验证。

By means of I-DEAS software, taking quality as object function, this paper evaluates and optimizes the dimension parameters of mid-mudsill steel structure of an electrostatic precipitator.

采用现代设计方法及有限元技术，应用i - DEAS软件对某电除尘器底中梁钢结构的主要尺寸参数进行了以质量为目标函数的评估和优化。

Then their 3-D solid models were built on I-deas software. Based on the experimental data of the milling experiments with the three types of the milling cutters we compare the three types of…

在大量实验数据的基础上，对三种齿形铣刀在铣削力上进行了对比评判，优化出使用效果最佳的铣刀为双层齿倒角铣刀。

The two modes of interoperation technology were analyzed and commented on. The realization technology of interoperation between application and host program was exemplified by I-DEAS software.

在剖析了互操作技术两种模式基础上，以先进的I-DEAS工具为例介绍了两种模式下应用程序与I-DEAS宿主程序互操作的实现技术。

According to the structural design scheme for horizontal shafting of a large-aperture telescope, the structural analysis model is established by means of the structural analysis software I-DEAS.

根据某大口径望远镜水平轴系的结构设计方案，利用结构分析软件I - DEAS，建立了结构分析模型，求得了水平轴系前几阶固有频率和振型图。

Based on elastic FEM theory and heat transfer theory, the author USES I-DEAS software as a CAE tool, builds the finite element analysis method and techniques of the principle shaft system on work.

本文采用I - DEAS软件作为计算机辅助分析的工具，基于弹塑性有限元理论和传热学理论，建立了工作状态下主轴系统的有限元分析方法及技术处理方法。

This article makes a finite element analysis on the boring bar of combination boring-machine designed particularly for processing spindle holes of locomotive engines by using I-DEAS Master Series5.

针对镗杆在加工过程中的振动问题，结合碰撞减振理论及复合层叠材料力学原理，设计出了一套新型抗振镗杆。