查询
1 词典释义:
anodic oxidation
时间: 2025-11-19 20:06:04

阳极氧化

双语例句
  • The anodic oxidation of lead sulphate is well known.

    而硫酸铅的阳极氧化反应则是众所周知的。

  • Finally, a model of anodic oxidation of PAN HM carbon fiber were proposed.

    根据实验结果,提出了PAN基高模炭纤维的氧化模型。

  • Pulse current technique was adopted in hard anodic oxidation of aluminum alloys.

    提出将脉冲技术应用于铝合金硬质阳极氧化。

  • This product can also handle by anodic oxidation of welding provides a good match.

    本品也能为经阳极化处理的焊接提供良好的配色。

  • Through the anodic oxidation, the porous coating on titanium materials has been achieved.

    通过阳极氧化法,在钛合金表面制备了多孔形貌的涂层。

  • LED lights use high-quality 6063 aluminum venture, the special anodic oxidation treatment.

    LED 斗胆灯选用优质6063铝材,经阳极特殊氧化处理。

  • 99% high purity aluminum reflector, anodic oxidation treatment, high reflection efficiency.

    采用99.99%高纯铝反射器,阳极氧化处理,反射效率高。

  • Objectives: To study the oxide film of pure titanium implant material treated by anodic oxidation .

    目的:研究阳极氧化对纯钛种植材料氧化膜的影响。

  • It is shown that the tip induced oxidation process can be considered as electrochemical anodic oxidation.

    实验说明针尖诱导氧化过程可被认为是电化学阳极氧化过程。

  • The key of the manufacturing process of anodic oxide film of aluminium wire is the continuous anodic oxidation.

    氧化铅丝生产过程中最关键的工艺是连续阳极氧化。

  • Furthermore, the preparation process of the cooling device basing on aluminum anodic oxidation process is presented.

    在此基础上,研究了基于铝阳极氧化的冷却装置模型制备工艺。

  • The anodic oxidation process of aluminum in sulfuric acid was investigated using constant voltage electrolysis method.

    采用恒电压电解法研究了铝在硫酸中的阳极氧化过程。

  • The present paper Outlines that the surface area of sintered porous metal for valve can be measured by anodic oxidation.

    本文提出了用阳极氧化法测定阀金属烧结多孔体的表面积。

  • Methods:The surface of pure titanium specimen was modified by a compound method of pre-anodic oxidation and hydro-deposition.

    方法:采用预阳极氧化及水热沉积复合法对纯钛试件进行生物改性。

  • The effects of anodic oxidation process on thickness, corrosion resistance and surface morphology of hard oxidation film were studied.

    为了研究阳极氧化工艺条件对硬质氧化膜的厚度、耐蚀性、表面形貌的影响。

  • This series LED is used for indoor and outdoor lighting, the light body using high quality aluminum, surface anodic oxidation process.

    此系列LED用于室内室外照明,灯体采用高质量铝材,表面阳极氧化处理。

  • This article discussed anodic oxidation mechanism of aluminium plate by means of electrode potential, Nernst equation, overpotential and so on.

    用电极电势、能斯特方程式和超电势等,论述了铝板的阳极氧化机理。

  • Meanwhile the mechanism of the anodic oxidation treatment to improve the interfacial property of composites is obtained by analyzing the results.

    同时通过实验结果分析,阐明阳极氧化处理使复合材料界面性能改善的机理。

  • A hard anodic oxidation technique of forge aluminum alloy LD7 for piston was studied. The prescription and parameters of the technique were set up.

    对铝合金LD 7硬质阳极氧化工艺进行了研究,提出了适合ld 7铝合金的工艺配方与工艺参数。

  • The influence of technology of anodic oxidation on the physicochemical properties of rare earth Al-Mn alloy electrolytic coloured membrane is recited.

    本文叙述了阳极氧化工艺对稀土铝锰合金电解着色膜物理化学性能的影响。

  • This paper studied a new technique for gathering coloration and occlusion to one step on the surface of porcelain anodic oxidation of aluminium alloy.

    研究了在铝合金瓷质阳极氧化膜层表面进行染色、封闭一步处理的新工艺。

  • Aluminum anodic oxidation frame, soft cushion, foldable backrest, 6front caster and 20 'rear wheel, double brace, with handle brake, with safety belt.

    车架阳极氧化,软座垫,靠背可折翻,6“前轮,20”后轮,双支撑,带后手刹,附安全带。

  • The different degradation pathways of o-chlorophenol were revealed in the anodic oxidation and the cathodic reduction through chromatographic analysis.

    通过色谱分析简单揭示了邻氯苯酚在阳极氧化和阴极还原中的不同降解路径。

  • Thus the anodic oxidation was performed at a constant voltage in an oxalic acid solution using highly pure al as the anode and platinum net as the cathode.

    采用高纯铝作阳极,铂网作为阴极,在草酸溶液中进行恒压阳极氧化。

  • The anodic oxidation and electrolytic colouring of 6063 aluminum alloy containing rare earths in solutions of sulfuric acid and stannous sulfate are studied.

    本文系在硫酸、硫酸亚锡溶液中对添加有稀土的6063变形铝合金进行了阳极氧化和电解着色。

  • This text expatiated the craft parameters, technique main points and matters needing attention of anodic oxidation and dye black for aluminium and its alloy.

    本文主要阐述了铝及铝合金阳极氧化与染黑色工艺参数、技术要点及注意事项。

  • The hardened anodic oxidation coating on sewing machine components(2A12)was investigated in different sulfuric acid density solutions with special apparatus.

    采用自制脉冲恒流电源,研究了缝纫机零部件(2A12)在低硫酸浓度下的脉冲恒流硬质阳极氧化工艺。