查询
1 词典释义:
deviator
时间: 2025-06-28 03:21:41
英 [ˈdiːvɪˌeɪtə]

n.持异议者;背离者

双语例句
  • And its effect increased with the increasing of static deviator stress.

    且静偏应力的影响随着静偏应力的增大而显著。

  • The hardening function was formed by incorporating an equivalent plastic deviator strain and a volume strain.

    形成的硬化函数通过将等效塑性偏应变和体积应变。

  • The deflector, also called as deviator, is a specialized tool which is used to lead milling tool to mill the one side of casing to form a window .

    导斜器也叫斜向器或造斜器。它是引导磨铣工具从一侧磨铣套铣管形成窗口的专用工具。

  • So, a deeper understanding of the significance and the role of the invariants of the stress deviator which are considered more abstractly has been given.

    由此对通常认为比较抽象的偏应力张量不变量的意义与作用有更深层次的理解。

  • The relationship between shear strain and time of Yingkou soft soil is obtained under a series of different cell pressures and different deviator stresses.

    利用自行改装后的三轴蠕变仪对海相沉积的营口软土进行蠕变试验,获得了在不同围压、不同偏应力条件下的剪切应变与时间关系数据。

  • The value of strain of undrained conventional triaxial compression creep is less than that of reduced triaxial compression creep under the same deviator stress;

    在相同偏应力条件下,不排水常规三轴压缩蠕变的应变值要小于减压三轴压缩蠕变的应变值;

  • Unfortunately, previous work rarely incorporated the effect of initial deviator stress on cyclic degradation behavior and dynamic stress-strain relationship of soft clay.

    以往的研究大多忽略初始偏应力对软黏土循环软化及动应力-应变关系的影响。

  • Experimental results showed that the resilient modulus of unsaturated cohesive subgrade soils reduced with the increase of deviator stress and the decrease of matric suction.

    研究结果显示重复荷载下之偏应力愈大则回弹模量愈小,且回弹模量随基质吸力的增加而增加。

  • When the failure criterion is decided, the limit accumulate energy dissipation can be fitted by a formula which includes the average stress, deviator stress ratio and cyclic axial stress.

    当破坏标准选定时,界限累积耗损能量与平均应力、偏应力比及动应力间较好的回归关系。

  • In the test, after anisotropic consolidation, keeping the deviator stress, pore water is injected using pore water control apparatus under a constant volumetric strain controlled condition.

    该实验是在各项异性的固结作用后保持差应力,使用孔隙水控制装置在体积不变的应变控制条件下将孔隙水注入。