With a decrease in the mole ratio, volatilization of sulfur decreased rapidly.

随着克分子比的降低，硫的挥发率也急剧下降。

Mole ratio is the key factor that influenced the formal de hyde content of urea resin.

降低人造板甲醛释放量的关键在于使用低游离甲醛树脂胶。

The effects of temperature, pressure, mole ratio and space-velocity on the reaction were discussed.

本文讨论了反应温度、反应压力、空速和原料配比对反应的影响。

The contrast decreased when triiodide was added near the surface of the grain, or when the mole ratio of io…

但是，乳剂的反差随着三碘化钾溶液加入位置逐渐靠近表面而不断降低，随着碘化钾和碘摩尔比的增加迅速降低。

The mole ratio of main raw materials and reaction temperature, time and pressure are examined by multi-factor test.

利用正交试验对反应中主要原料的摩尔比、反应温度、反应时间、反应压力的影响进行了考查。

Such reaction conditions as catalyst type, reactant mole ratio, water-carried agent and temperature were determined.

考察了催化剂、反应物的摩尔比、带水剂、反应温度等对反应的影响。

The catalyst quantity, alcohol-acetic mole ratio, feed rate and reflux feed site effects on the process are investigated.

对醋酸与正丁醇酯化反应体系，考察了催化剂用量、醇酸比、进料流量、进料位置、回流位置等因素对过程的影响。

Effects of mole ratio of 1, 2- ethanedithiol to isovaleraldehyde, amount of catalyst and refluxed time were investigated.

研究了乙二硫醇与异戊醛物质的量比、催化剂用量、反应时间等因素对反应收率的影响。

The kinetics of the polycondensation between diphenyl-dichlorosilane and bisphenol-A in equal mole ratio has been studied.

研究了二苯基二氯硅烷与双酚-A在等克分子比条件下的缩聚反应动力学。

The effects of reaction temperature, catalyst amount and mole ratio of water to methyl acetate on conversion were investigated.

实验还测定了反应温度、催化剂用量和水酯比对乙酸甲酯水解率的影响。

The factors affecting the yield of trichloroaniline are reaction temperature, reaction time, and the mole ratio of raw materials.

通过实验考察了反应温度、反应时间、滴加时间及物料比等因素的影响。

The influences of amount of catalysts, microwave power, microwave irradiation time and the mole ratio of alcohol to acid were studied.

考察了催化剂的用量、微波功率、微波辐射时间、醇酸比对酯产率的影响。

Analyses the principle of masking and the influencing of mole ratio, coating, and temperature to the conductivity of bimetallic powder.

同时分析了掩蔽原理及包摩尔比、覆量、温度对双金属粉导电性能的影响。

The effects of mole ratio of reactants, selectivity and quantity of catalyst and reaction time on the conversion rate have been studied.

并对原料配比、反应时间、 催化剂的选择及用量对转化率的影响进行了讨论。

The effects of catalyst amount, mole ratio of sodium benzoate and benzyl chloride, reaction time on the esterification rate were studied.

考察了催化剂用量、釜残液与氯化苄的物质的量的比和反应时间对收率的影响。

The results of reactions are influenced by many factors, including reactant mole ratio, reaction temperature, heating program, and so on.

反应性熔盐法的反应结果与多种因素有关，包括：反应物配比、反应温度、反应时间、升温速率、降温速率等。

The influences of reaction conditions such as mole ratio, reaction time, reaction temperature and some metal salts were examined in detail.

考察了原料配比、反应时间、反应温度、及金属盐的加入对反应结果的影响。

This paper dealt with reaction mechanisms and synthesis and the effects of raw materials mole ratio, reaction temperature and reaction time.

介绍了乙二醇单异丁醚的反应机理及原料的摩尔比、反应温度和反应时间等因素对合成反应的影响。

The effect of acid and alcohol mole ratio, the amount of vitamin C catalyst and reaction time on the yield of Nipagin esters was investigated.

考察了酸醇摩尔比，催化剂用量，反应时间等对酯收率的影响。

Synthesis of unsaturated polyester resin with different mole ratio of adipic acid to diethylene glycol and effects of toughening were studied.

用不同摩尔比的己二酸，一缩二乙二醇合成不饱和聚酯树脂，并对增韧效果进行研究。

The mole ratio of tetrabutylammonium hydroxide to tetraethylammonium hydroxide in mixed templates affected the purity of TS-1 crystal obviously.

当混合模板剂中四丁基氢氧化铵和四乙基氢氧化铵的比例发生变化时，会影响TS-1晶体的纯度。

This paper mainly studies the effect of pressure, LHSV, temperature and mole ratio of alcohol and alkene on conversion ratio of tertiary amylene.

本文主要考察和研究了反应压力、空速、反应温度、醇烯摩尔比对叔戊烯转化率的影响。

The effects of mole ratio between resorcinol and phenol, also between phenol and aldehyde , original reaction time on gel time and shear strength were studied.

考查了间苯二酚与苯酚物质的量比、酚与醛物质的量比、预反应时间等因素对胶粘剂凝胶时间与剪切强度的影响 ；

There were crystal substances in the insoluble part, which had high amount of selenium and mercury in the mole ratio of almost 1:1 and was proved to be tiemannite.

不溶部分有晶体颗粒物质存在，其中硒、汞含量很高，且以近似1：1的摩尔比关系存在。进一步确证这些颗粒物质是硒化汞晶体。

The effects of catalyst quantity, acetic alcohol mole ratio, acetic acid and ethyl alcohol feed site, reflux ratio and reflux composition on the process are investigated.

对乙酸与乙醇酯化反应体系，考察了催化剂用量、酸醇比、进料位置、回流比、回流组成等因素对过程的影响。

The amidate modified reaction of lanolin was, studied Material mole ratio, temperature, time, the dosage of catalyzer etc. factors affecting on the reaction were discussed.

研究了羊毛脂酰胺化改性反应，探讨了物料摩尔比、温度、时间和催化剂用量等对反应的影响。

The effects of mole ratio of raw material, amount of catalyst, reaction temperature and time on the yield are investigated. The most favorable reaction conditions is obtained.

通过考察原料摩尔比、 催化剂用量、加料温度、反应温度和反应时间等因素对收率的影响，得到了最佳反应条件。

Suitable catalyst was selected, the effect of catalyst mass, mole ratio of sulfur to FCC gasoline, reaction temperature and reaction time on the sulfur content of product were investigated.

选定了较好的催化剂，并考察了催化剂用量、原料配比、反应温度和反应时间对产物硫含量的影响。