This is the basic problem of electromagnetic compatibility.

这就是电磁兼容的主要问题。

Small volume, strong electromagnetic compatibility and convenient installation.

体积小，电磁兼容性强，安装方便。

Electromagnetic compatibility is the prime reliability problem of electronic equipments.

电磁兼容问题是电子装置的第一可靠性问题。

The paper introduces electromagnetic compatibility(EMC)design for a certain missile test equipment.

介绍了某型检测设备系统的电磁兼容设计方法。

They also excel in their high electromagnetic compatibility and stability over a wide temperature range.

他们还擅长于自己的高电磁兼容性，在很宽的温度范围内稳定。

EMI affects both the electromagnetic compatibility (EMC) performance and the cost of operation for SMPS.

EMI不仅影响开关电源的电磁兼容(EMC)性能，而且影响开关电源的工作成本。

Randomized modulation technique can improve the electromagnetic compatibility of power electronic system.

随机调制技术能够改善电力电子系统电磁兼容性。

It is necessary for an electromagnetic compatibility design to prospect an consider its possible EMI levels.

这是必要的电磁相容性的设计，以一种前景考虑其可能的电磁干扰水平。

The EMI suppression circuit is designed to meet the requirements of electromagnetic compatibility and safety.

为了满足电磁兼容性和安全性要求，设计了EMI抑制电路。

The electromagnetic compatibility problem of arc welding equipment is very serious that cause more and more concerns.

弧焊设备的电磁兼容性问题日益突出，受到越来越多的关注。

The research on antenna mutual coupling has been one of important problems in the area of Electromagnetic Compatibility.

天线互耦研究已成为电磁兼容研究领域的重要问题之一。

The grounding equipment is very important aspect when discussing the problem of substation electromagnetic compatibility.

在探讨变电站电磁兼容问题时，接地装置是不可忽视的一个重要方面。

This paper introduces the content of electromagnetic compatibility (EMC) of CNC system switching power source and design method of it.

本文介绍了数控系统开关电源电磁兼容性emc涉及的内容，然后提出开关电源电磁兼容性的设计方法。

These formulas are suitable for computer-aided electromagnetic compatibility (EMC) analysis and land mobile communications engineering.

表示式适用于机助电磁兼容（EMC）分析和陆地移动通信工程。

The electromagnetic compatibility problem of fixed extinguishing system control devices is very serious that cause more and more concerns.

固定灭火系统控制装置的电磁兼容性问题日益突出，受到越来越多的关注。

Purpose:To make an electromagnetic compatibility test in accordance with the technical requirements for the CO analyzer aboard submarines.

目的：根据潜艇用一氧化碳分析仪技术战术指标要求，对该仪器进行电磁兼容性能试验。

Solving the fault current distribution is one of the most important tasks in the research of electromagnetic compatibility in power system.

获取准确的短路故障电流分布是电力系统电磁兼容的重要内容之一。

The human body, a partial electromagnetic compatibility system, was facing the harassment challenge of environmental electromagnetic waves.

人体这个局部的电磁兼容系统，正面临着环境电磁骚扰的挑战。

Based on analysis of electromagnetic compatibility (EMC) for intelligent electrical apparatus, some relevant countermeasures were presented.

基于对智能电器中的电磁兼容分析，提出了一些相应的对策。

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test.

电磁兼容性(emc)。第4 - 3部分：试验和测量技术。辐射、射频和电磁场抗干扰试验。

To make the electric equipments working without interference on spacecraft, electromagnetic compatibility (EMC) of the whole system should be guaranteed.

为使航天器上电子设备互不干扰地工作，必须保证整个系统的电磁兼容性。

The article introduces the basic concept of electromagnetic compatibility and the design of electromagnetic compatibility used in the fire control computer.

介绍了电磁兼容性的基本概念以及火控计算机系统中采用的电磁兼容性设计方法。

Electromagnetic compatibility (EMC) - Part 4-11: testing and measurement techniques - voltage dips, short interruptions and voltage variations immunity tests.

电磁兼容性。第4 - 11部分：试验和测量技术。电压磁倾角、短暂中断及电压随变抗扰性试验。

The calculated results agree well with the measured ones. The results obtained are contributive to TEM cell design and EMC (electromagnetic compatibility) test.

测量结果证实了计算方法的有效性，所得结论对TEM传输室的设计与测试具有重要意义。

This article provides the successful solutions that restrain disturbance voltage for the technical personnel engaged in the electromagnetic compatibility design.

为从事电磁兼容性设计的技术人员提供了成功的抑制骚扰电压的解决方案。

Electromagnetic Compatibility(EMC) problem is very conspicuous in electrical and electronic products, and EMC manufacture has being payed more and more attention.

电气电子产品的电磁兼容性问题很突出，电磁兼容制造也越来越受到重视。

We present reliability design specially electromagnetic compatibility design, and related theories for the system as foundation for further reliability experiments.

提出了系统可靠性设计尤其是电容兼容性设计和可靠性试验的理论，为下步的可靠性试验做准备。

On the basis of the need of the lamplight for the helicopter to take off or touch down at the warship, the standard of the electromagnetic compatibility is considered.

根据直升机起飞、着舰时所需的助降灯光使用要求，考虑电磁兼容性标准，详细介绍了灯光助降系统的主机板、电源板、驱动电路、故障检测电路等硬件设计过程。