Separate the end cap from the bumper.

将末端端盖和保险杆分隔开。

This property specifies the size of the top end cap.

这个属性定义了顶部的间隔大小。

This property specifies the size of the left end cap.

这个属性指定了左边顶端的大小。

The end cap will be used as the bearing or swivel point.

端盖将被用来作为轴承或旋转点。

Install the bolts attaching the end cap to the front fender.

拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。

Install the bolts attaching the end cap to the front fender.

安装连接末端端盖到前挡泥板的螺栓。

Install the bolts attaching the end cap to the front fender.

拆去连接末端端盖前面到部分板下侧的螺丝。

Note the end cap is recommended in the femoral procedure only.

其他手术不推荐使用封帽。

End Cap: Belt Tensioning System, easy access, easy adjustment.

完第：皮带张紧系统，方便，调整方便。

I made a simple brass servo mount that's bolted to the end cap.

我提出一个简单的黄铜伺服山认为的螺栓到去年底的上限。

An end cap (64) is disposed at a closed end (66) of the coil system (38).

端盖(64)被放置在线圈系统(38)的闭合末端66。

End Cap - This is used in doorways that meet carpet, ceramic or stone tiles.

完帽，这是用来在门口迎接地毯、石材或陶瓷地砖。

It was then placed in a PVC end cap and short pipe, filled with water and frozen.

它其后被放置在一个聚氯乙烯完帽和短管，灌满水和冻结。

The end of the cylinder is closed by an end cap which is secured to the cylinder.

圆筒体的一端用一个固定在筒体上的端盖封闭。

Position the end cap on the rear of the retainer and the outer edge of the bumper.

拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。

Position the end cap on the rear of the retainer and the outer edge of the bumper.

在扣件尾部和保险杆边缘外部定位末端端盖。

Carefully check the amount of water seepage from the end cap and end bell weep hole.

仔细地检查漏水孔端盖与端座水的渗出量。

The split type end caps are integrally formed by end cap connecting bolts in connection.

所述端盖为剖分式，通过端盖连接螺栓连接为一体。

Remove the screw attaching the front of the end cap to the underside of the quarter panel.

拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。

I think I would even make a modified assembly that would replace the ballast tank end cap.

我想，即使作出修改的大会，将取代压载水舱端盖。

Install the screw attaching the front of the end cap to the underside of the quarter panel.

拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。

Pull back the wheelhouse liner and remove the bolts attaching the end cap to the front fender.

拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。

Pull back the wheelhouse liner and remove the bolts attaching the end cap to the front fender.

拆去连接末端端盖前面到部分板下侧的螺丝。

Our square end cap design provides flexibility for either flush-face or horizontal (side) mounting.

我们的广场端盖设计，提供了可以冲洗面对面或横向(侧面)安装的灵活性。

The end (2) of the first body (8) and the end (16) of the second body (9) are fused to a first end cap (6).

第一主体(8)的端部(2)和第二主体(9)的端部(16)被熔接到第一端盖(6)。

When cleaning, keep motor, end cap and batteries away from liquids to prevent corrosion of electronic parts.

清洁时，确保电机、端盖和电池未沾水，防止电子部件腐蚀。

The end (17) of the third body (10) and the end (18) of the first body (8) are fused to a second end cap (11).

第三主体(10)的端部(17)和第一主体(8)的端部(18)被熔接到第二端盖(11)。

The first 6 plastic parts mold test, there are three more; barrel, cap and end cap should be ready by these few days.

兄弟们，先看看我们已试模的六个零件吧，还有三个；笔管，笔盖，尾盖，这几天应该能试出。

A first end cap is located adjacent the first end of the tube, wherein the first end cap comprises at least one air hole.

第一端盖位于套管的第一端附近，其中第一端盖包括至少一个气孔。